308 GTS Side Scoop Differences? | Page 2 | FerrariChat

308 GTS Side Scoop Differences?

Discussion in '308/328' started by DustyM, Feb 8, 2021.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. ragtop1

    ragtop1 F1 Veteran Silver Subscribed

    Joined:
    Nov 11, 2006
    Messages:
    5,239
    Location:
    Ontario
    Full Name:
    Larry Warren
    There are 3 bolts missing on your rear wheel.
     
  2. ferrariowner

    ferrariowner Formula 3

    Joined:
    Feb 21, 2014
    Messages:
    1,155
    Location:
    Mansfield, TX
    Full Name:
    Ron
    Tire is flat.
     
  3. kcabpilot

    kcabpilot Formula 3

    Joined:
    Apr 17, 2014
    Messages:
    1,606
    Location:
    California SF bay area
    Full Name:
    Paul
    The word "scoop" is probably a misnomer but you're right in that the aesthetical aspect gives them the appearance of being a scoop. In truth they are just inlets and in the case of the right side being plumbed into the induction there is an obvious pressure differential but, as pointed out, there is also a pressure differential for the left side to oil cooler when the car is in motion as there is a low pressure area above the engine deck that is translated to the engine bay through the grills. So that side functions too and in regards to efficiency it would be more about them not creating additional drag rather than trying to "scoop" air in.

    Whatever, they sure look cool as hell.
     
  4. BigTex

    BigTex Seven Time F1 World Champ Owner Rossa Subscribed

    Joined:
    Dec 6, 2002
    Messages:
    79,368
    Location:
    Houston, Texas
    Full Name:
    Bubba
    Mine caught a bird once, I found him dead against a home built version of the German screen
     
  5. BigTex

    BigTex Seven Time F1 World Champ Owner Rossa Subscribed

    Joined:
    Dec 6, 2002
    Messages:
    79,368
    Location:
    Houston, Texas
    Full Name:
    Bubba
    To the OP, I have an OEM set of 14" Ferrari rims...you should advise the owner to correct the quarter panel mods, procure the stock FRP scoops that are missing, and fit the OEM 14" rims, or the far more expensive, later 16" rims (optional since 1977).....

    That would restore the value of the car, which "as it sits" presents very poorly, despite that lovely paint job.
    Great color...
     
  6. ProvaMo

    ProvaMo Formula Junior

    Joined:
    Jun 29, 2004
    Messages:
    350
    Location:
    Mid West
    Full Name:
    Paul John
    Nice wheels would be nice.

    But look inside the cut-open "scoops" at the bits and pieces inside, and the mismatched doors to the stated year of car, there's another story besides wheels here...
     
  7. JasonMiller

    JasonMiller F1 Rookie Silver Subscribed

    Joined:
    Jul 16, 2004
    Messages:
    3,647
    Location:
    Co Springs/ Texas
    Full Name:
    Jason Miller
    What is a set of 14inch original rims worth?
     
  8. BigTex

    BigTex Seven Time F1 World Champ Owner Rossa Subscribed

    Joined:
    Dec 6, 2002
    Messages:
    79,368
    Location:
    Houston, Texas
    Full Name:
    Bubba
    Who knows?

    I 've never sold any!

    I have like 6 Cromos and a set of five Campys...have the 16"s too.

    I run after market 3 piece 16"s on the car...but with climbing values should have a set of 14"s ready, to show.

    A 1979 would be correct with either size really, should match the dash sticker, if still present.
    I guess "fixing the door locks" could go on the list....
     
  9. Rosey

    Rosey F1 Rookie

    Joined:
    Nov 5, 2015
    Messages:
    3,803
    Location:
    Australia
    Full Name:
    Mark R
    I would imagine that's not an easy job to get that scoop edge fixed.
     
  10. mwr4440

    mwr4440 Five Time F1 World Champ Rossa Subscribed

    Joined:
    Jun 8, 2007
    Messages:
    57,926
    Location:
    Bavaria, The 'Other' Germany
    Full Name:
    Mark W.R.
    Mine never had it.
     
  11. mwr4440

    mwr4440 Five Time F1 World Champ Rossa Subscribed

    Joined:
    Jun 8, 2007
    Messages:
    57,926
    Location:
    Bavaria, The 'Other' Germany
    Full Name:
    Mark W.R.
    No. Not that I recall.

    CHEAP-Assed chicken wire, painted black and just pop-rivited in.

    Pretty crappy 'fix' IMNSHO.


    I found a pair once and the joker wanted €600 for a pair. I made a pair for grins and giggles for about €3, and they look much better than the originals.
     
    Last edited: Feb 11, 2021

Share This Page