355 355 euro steering wheel

Lucky you buddy!

 

You need to get the hill engineering adapter and find someone to 3d print the column.

 

So is $6k USD with the original F355 non-airbag adapter pretty good?

 

Here is mine, paid about $3K for it last year, not fitted it yet but mint condition.

Will it be enough with the Hill adapter?

Image Unavailable, Please Login Image Unavailable, Please Login

 

If it's in mint shape I'd do it

 

That looks fantastic. Where did you end up finding it?

I think the HE adapter should work

 

looks like slight scuff on one corner but in is on the backside. pretty good otherwise. The horn button looks different, looks like the one on ShineKens Monte Carlo Momo wheel.
Image Unavailable, Please Login Image Unavailable, Please Login

 

Horn button doesn't look original but it wouldn't bother me...but for that price I'd be expecting all original and in top shape.

 

Hill engineering should have an adapter to fit the pre-airbag wheel. It’s the leather wrapped column extender or whatever you want to call it that needs to be made. Perhaps 3d printed in plastic and then leather covered. Without this piece, I’m assuming the adapter is exposed.



Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login

 

I can’t believe he put the wheel face down on the rough tile floor . Original horn button is available.

 

On closer look the photo of the front side...the perforations look "smoothed" out almost as if a filter was used on the photo?

Not sure if that was intentional...or if it's the lighting. Might be hiding imperfections?

 

Should be this

https://www.ricambiamerica.com/355-steering-wheel-adapter-early-wheel-to-late-car.html

The steering wheels sold individually are probably coming from crashed cars and the dissembler not realizing you need the whole thing to make it work. When sold new (waay back in the days) it comes complete. You couldn’t buy the pieces separately.

 

We should convince Hill Engineering to 3d print the column in plastic. That would solve a ton of problems. My buddy has had his steering wheel for a few years and hasn’t figured out a solution to put it on without looking ghetto.

 

Can't be hard to replicate. You could 3D scan it with any modern iPhone/iPad equipped with Lidar.

 

Or, if an adapter was made that duplicated the outer diameter of the sleeve, could just leather wrap that.

 

I bought it from Germany.

 

Your horn button is not the same as mine, yours aftermarket button?

Here's another like my horn button...

 

What about this, will it work and look nice?

Image Unavailable, Please Login

 

Not sure if the bolt pattern is the correct diameter. Also appears to be longer based on the length of the storm drain tubing

 

Gross lol

 

Man, this thread makes me glad I have a 348! haha.

 

Since these have some worth, I’m just gonna throw this out there. Magic Eraser.

 

where this from?

 

From Momo

 

I have the wheel and have the hill adaptor that Jim (intmd8)sent me and still haven’t installed it.

Plan was to have the adaptor leather wrapped.

Maybe a spring project finally...