LEDs on steering wheel do not light up at any RPM

Cost for the proxy file upload was $175

 

That the cheapest Ferrari "part/upgrade" you will ever get!!!!!

 

Is this "proxy file" the only way to get the LED lights working? Is the dealer the only place to get it uploaded, or is there a file I can upload manually I can find on the internet? I can't seem to find it.
I also tried deactivating and re-activating from the TFT menu with no success.
I recently replaced my NVO board (same steering wheel it came with), and everything works perfectly fine except that.

 

Yes but prices quoted are wrong dealer will charge like 3k to fix this. I know crazy


Sent from my iPhone using Tapatalk

 

I don't think $3k because I've read several people having entire boards changed at the dealer for much less than that. But, just trying to find out about this software update. Thanks though

 

Trust me I am right.
This is what the dealer charges if u don’t have LED and bought a steering wheel without them .
Here are email quotes from
Both Ferrari of Sillicon valley and Ferrari of SF. Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login


Sent from my iPhone using Tapatalk

 

Thanks for the info. Although I wonder if that’s for replacing the steering wheel, which I’ve read would need a full software update to enable that functionality.

I am just trying to get mine to work again after changing that computer board. That’s why I was curious if there was some trick to re-calibrate it.

 

Yeah that’s for replacing with a new one. Urs should be cheaper, maybe covered by warranty!


Sent from my iPhone using Tapatalk

 

This is what appears on a Pista to provide the option under settings: Image Unavailable, Please Login

 

hi and thanks for your post!!!!! very very useful!!!!
so if I well understand, the problem was only the proxy file upgrade, after it the lights turn on.... and your dealer charge you 175$.
It is correct?

I would do the same work and it should be helpful to know the cost of the proxy before starting it.
thanks.....
Sebastiano

 

Good that they now work !

Now .... you can have your light be changed to your wishes !

Mine look this way. You can buy them in U.S.A. ...

Info needed ? Mail [email protected]

Image Unavailable, Please Login

Image Unavailable, Please Login

 

Definitely needs an upgraded proxy file, but the Leonardo system can update the proxy file without the need to pay the Dealer $3,000 for a new proxy file.

If anyone is interested, I have an LED Carbon Fiber Wheel that I am selling.

 

Hello, I was wondering if we need to download the proxy file to upload it to the car using Leo? I have the Leo software but I’m not sure if I need to get a file to upload to the car, or if I can just change the configuration setting with the Leo to make my LED lights work on my steering wheel. I have a 488 GTB I’m working on.

sorry to revive a thread

 

What was the solution Leo or dealer

 

Can an good independent shop flash the proxy codes with a new board?

 

A new NVO board is less than $500 and can be ordered with the proxy file already installed. This may actually be the cheapest option.