308 QV Side View Mirror | FerrariChat

308 QV Side View Mirror

Discussion in '308/328' started by Labman, Aug 14, 2021.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Labman

    Labman F1 Rookie
    Silver Subscribed

    Jun 25, 2010
    3,801
    Long Island, NY
    Full Name:
    Steve
    Anyone ever have a gear strip on their side view mirror? Is it an easy repair? I can adjust up and down but it gets stuck side to side.
     
  2. rmgaiss

    rmgaiss Rookie

    Feb 15, 2005
    39
    Lake City, FL
    This should be of assistance:



    Gotta love YouTube Univ!
     
  3. Dave Bertrand

    Dave Bertrand Formula Junior
    Rossa Subscribed

    Dec 24, 2005
    824
    Castle Rock, CO
    No, he's talking about the electrical adjustment.
     
    Labman likes this.
  4. rmgaiss

    rmgaiss Rookie

    Feb 15, 2005
    39
    Lake City, FL
    Sorry, my bad.
     
  5. Labman

    Labman F1 Rookie
    Silver Subscribed

    Jun 25, 2010
    3,801
    Long Island, NY
    Full Name:
    Steve
    Correct. I though for sure someone here would have had the same issue and had a fix for it. I guess not. I will see if I can pop the mirror out somehow to get to the gear mechanism.


    Sent from my iPhone using FerrariChat
     
  6. Labman

    Labman F1 Rookie
    Silver Subscribed

    Jun 25, 2010
    3,801
    Long Island, NY
    Full Name:
    Steve
    Opening up my older thread again. I have to fix this. Can the side view mirror glass be safely popped out to get to the gears behind it?
     
  7. teatime

    teatime Rookie

    Mar 8, 2009
    43
    NW Burbs, Chicago
    Full Name:
    Todd A.
    The glass can be removed, as I had to replace mine. I don't know if I got lucky, but I was able to remove it safely.....but proceed with extreme caution and you probably want to remove the mirror completely off the car when you attempt to do it. I did this about 12 years ago and remember positioning the glass all the way to one side where I could fit my fingers behind the back side and gently push from the center ...and mine popped out...but, it is not very thick and the last thing you want to do is crack it by putting too much stress on the edges..best of luck if you attempt it.
     
    Labman likes this.

Share This Page