Where Does This Vacuum Hose Go? | FerrariChat
Buy

Where Does This Vacuum Hose Go?

Discussion in '308/328' started by Dr Tommy Cosgrove, Nov 8, 2021.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Dr Tommy Cosgrove

    Dr Tommy Cosgrove Three Time F1 World Champ
    Owner Rossa Subscribed

    May 4, 2001
    36,426
    Birmingham, AL
    Full Name:
    Tommy
    #1 Dr Tommy Cosgrove, Nov 8, 2021
    Pulled off my intake manifold and it is too short to go back. I'm not even sure how long it has been off. I saw it when I was swapping plugs and extenders yesterday. Need to get a new one but what size is it and where does it feed to? Does it go to my ignition control box or does to attach to some emission equipment?
    Image Unavailable, Please Login
     
  2. smg2

    smg2 F1 World Champ
    Sponsor

    Apr 1, 2004
    16,329
    Dumpster Fire #31
    Full Name:
    SMG
    #2 smg2, Nov 8, 2021
    Feeds to the charcoal canister for fuel EVAP system.
     
    BLACK HORSE likes this.
  3. Dr Tommy Cosgrove

    Dr Tommy Cosgrove Three Time F1 World Champ
    Owner Rossa Subscribed

    May 4, 2001
    36,426
    Birmingham, AL
    Full Name:
    Tommy
    #3 Dr Tommy Cosgrove, Nov 9, 2021
    So I can just cap both ends off and not worry about it?
     
  4. Steve Magnusson

    Steve Magnusson Two Time F1 World Champ
    Lifetime Rossa

    Jan 11, 2001
    26,786
    30°30'40" N 97°35'41" W (Texas)
    Full Name:
    Steve Magnusson
    #4 Steve Magnusson, Nov 9, 2021
    Why not just reconnect it? (Capping off the fitting and the hose will do nothing for performance, and will only increase the fuel vapor emissions into the atmosphere as the charcoal bed will just remain saturated with fuel.)
     
    chas-3 and waymar like this.
  5. Dr Tommy Cosgrove

    Dr Tommy Cosgrove Three Time F1 World Champ
    Owner Rossa Subscribed

    May 4, 2001
    36,426
    Birmingham, AL
    Full Name:
    Tommy
    #5 Dr Tommy Cosgrove, Nov 9, 2021
    That's fine with me but the hose won't reach the manifold. What you see in the pic is as far as it will go. Can you tell me the size of the hose and I'll order a new piece.
     
  6. miked

    miked Formula Junior

    Feb 7, 2001
    897
    Cincinnati, Ohio
    #6 miked, Nov 9, 2021
    Just measure the diameter of the nipple then subtract a little for the ID of the hose. I have a cheap $2 HF caliper in my "take along" toolbox for just this type of "not to the .001" type of measurement". For the same type of braided hose European car parts places usually have it available by the foot. I just replaced all the braided hoses on my Audi ur-Quattro, I got them from Partsklassik, a Porsche restoration supplies company. They have the higher quality stuff.

    https://www.partsklassik.com/csearch.aspx?CategoryID=0&ManufacturerID=0&SectionID=0&PriceRange=0&SortBy=1&PageSize=12&AndOr=AND&DisplayMode=Grid&Condition=-1&Search=braided%20hose

    https://www.harborfreight.com/6-in-utility-caliper-63664.html?_br_psugg_q=caliper
     
    Dr Tommy Cosgrove likes this.
  7. Dr Tommy Cosgrove

    Dr Tommy Cosgrove Three Time F1 World Champ
    Owner Rossa Subscribed

    May 4, 2001
    36,426
    Birmingham, AL
    Full Name:
    Tommy
    #7 Dr Tommy Cosgrove, Nov 9, 2021
    Thanks!
     
  8. tuttebenne

    tuttebenne F1 Rookie

    Mar 26, 2003
    3,218
    Bay Shore, NY
    Full Name:
    Andy
    #8 tuttebenne, Nov 12, 2021
    I got cloth wrapped 7mm, 8mm and 9mm hose made in Germany from Belmetric in Massachusetts.
     
    Dr Tommy Cosgrove likes this.

Share This Page