360 Challenge Stradale Rear Deck Lid 'Swap'?

I’m looking to finish off the 'CS look' on my 360 and I’m struggling to find a decent solution to getting the right rear deck lid spoiler.

Prosport in the UK used to do a rear deck-lid add-on piece, but it seems to be discontinued. Sourcing a complete CS rear bonnet is proving difficult and/or very expensive.

Does anyone know if I can utilize an OE CS rear bonnet hood structure (which has the correct deck lid) and graft / re-use all my existing std 360 rear bonnet hood parts?

I'm sure there will be the odd fixture/fitting/bracket that won't be right, but if by-and-large I can reuse the glass, side-vents, etc. that would make the project cheaper; as I'm really after the additional (albeit marginal) aero benefit the decklid gives me, without resorting to a spoiler. I also have the CS front and rear bumpers and side-skirts to it will finish off the exterior profile nicely. But the exercise is not really to save weight, so I'm happy to re-use the metal frames not use carbon-parts.

Andy

PS. I've seen a few f430 challenge rear bonnet hoods for sale - am I right to assume the f430 rear bonnet hood is a different size to the 360?

 

Hit up Fchat user: rizzo308

He has or had a fiberglass add on piece for the rear decklid

 

ProSport still has their Deck-Lid, mine is from ProSport. Took a bit of massaging to get it to fit well from the body-shop, but, that's normal with FRP Parts. Any good body-shop will be able to make it look good.

Rizzo308 also has one too.

Impossible to find a complete CS Rear Bonnet.

 

Ok, it’s not showing on their website. I will give them a call.

BTW; I’m not looking to get a complete rear deck lid, just the main structure (part no.
67361311) and swap my other bits over.

 

S dog PM sent. M

 

The rear engine bonnet IF! some one had they IT can bring 10000.00 12000.00 dollars QUICK .. Last resort you could remove the third brake light and weld it a aluminum piece in. But it would take highly skilled welder and they are hard to find ....
Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login

 

I have been looking for almost two years now .

 

This is my mod with Rizzo’s frp add on. Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login


Sent from my iPhone using FerrariChat.com mobile app

 

If you are going to all this trouble, why wouldn't you get the perspex window, etc, and do it properly?

 

I you are going to use Lexan rear glass you are going to need carbon fiber struts and CS carbon fiber grills and the mounts for carbon fiber grills are not the same
Image Unavailable, Please Login

 

The grills are not carbon fiber. The cross braces are. But that's part of doing it properly.

 

Okay the louvers around the Lenax glass I call the them grills
art Information: COMPLETE L.H.GRILL SUPPORT.
Part Number: 67670600
Online Price: $2292.36

Diagram Association #: 011a
Click here to view all vehicles with this part.
1


Engine Bonnet : 112

 

Image Unavailable, Please Login

 

RL AND LH plates are not same on the Modena the labeled number 10 this is the Modena one
ngine Bonnet: 114
Image Unavailable, Please Login

 

And number part number six is deleted on the CS cars Part Number: 65398800
Online Price: $283.34

 

Anyone with firsthand visual perspectives or comparison (material/composition and fit) between ProSport and Rizzo's kit or are they the same parts different vendor?

 

I’m working with a Prosport now. I’ll post updates on how it goes.

I’ve got no desire to fill the brake light, I don’t own a CS. Just like the look, not trying to pretend.
Image Unavailable, Please Login

 

I kept my brake light.

This is the ProSport.
Image Unavailable, Please Login

 

Great picture

 

Rizzo’s Image Unavailable, Please Login

Image Unavailable, Please Login


Sent from my iPhone using FerrariChat.com mobile app

 

Just for clarification, a "true" CS rear deck does have the third brake light cutout, since this has been mandated on US cars since 1986. Not sure if the Euro spec CS's have it or not, but on this side of the pond, it was required. I've never seen one filled in but that does look impressive and takes some talent to pull off!

 

Roger that GhostDriver it takes a highly talented welder that specialize in welding Aluminum, there is not many people out there that can
Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login

 

Sorry to revive an old thread - curious if anyone has tried the ProSport or other option on a Spider, as the decklids are different

 

I'm a little late to this thread but I bought a whole OEM CS decklid with the Lexan, braces, grilles, all of it from Eurospares. I also got CS skirts and other parts from them previously. It's worth looking.

 

Wend did you buy it from Eurospares ?