Clean512 ..360 coupe project | Page 22 | FerrariChat
Buy

Clean512 ..360 coupe project

Discussion in '360/430' started by clean512, Jun 3, 2020.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

Page 22 of 35
  1. 67bmer

    67bmer F1 Rookie
    Silver Subscribed

    Oct 28, 2015
    3,119
    MD
    #526 67bmer, Jan 23, 2022
    It's just therapy to me, I don't know how else to describe it... I enjoy every minute I spend with my car!
     
    armedferret likes this.
  2. clean512

    clean512 Formula 3

    Feb 4, 2010
    2,127
    Full Name:
    Josh @jtcarprojects
    #527 clean512, Jan 23, 2022
    Its all therapy. I stare i fix i repeat. I stare i improve i repeat. Its never ending.
     
    armedferret likes this.
  3. clean512

    clean512 Formula 3

    Feb 4, 2010
    2,127
    Full Name:
    Josh @jtcarprojects
    #528 clean512, Jan 23, 2022
    veilstylez and armedferret like this.
  4. Some Guy in the sky

    Some Guy in the sky Formula Junior

    Sep 19, 2018
    367
    #529 Some Guy in the sky, Jan 24, 2022
    Is there a noticeable difference past 7500 rpm? If so I might have to look into getting the updated top part.
     
  5. clean512

    clean512 Formula 3

    Feb 4, 2010
    2,127
    Full Name:
    Josh @jtcarprojects
    #530 clean512, Jan 24, 2022
    I'll get back to you on that after its on.
     
  6. duck.co.za

    duck.co.za Formula 3

    Jan 9, 2007
    1,007
    Cape Town South Afri
    Full Name:
    Dave
    #531 duck.co.za, Jan 24, 2022
    Absolutely stunning .
     
    clean512 likes this.
  7. clean512

    clean512 Formula 3

    Feb 4, 2010
    2,127
    Full Name:
    Josh @jtcarprojects
    #532 clean512, Jan 26, 2022
    mwstewart, rizzo308, 360trev and 1 other person like this.
  8. 360trev

    360trev F1 Rookie
    Project Master

    Oct 29, 2005
    4,330
    Gibraltar
    Full Name:
    360trev
    #533 360trev, Jan 26, 2022
    clean512 likes this.
  9. clean512

    clean512 Formula 3

    Feb 4, 2010
    2,127
    Full Name:
    Josh @jtcarprojects
    #534 clean512, Jan 26, 2022
    Still got away to go but catching up too you
     
  10. duck.co.za

    duck.co.za Formula 3

    Jan 9, 2007
    1,007
    Cape Town South Afri
    Full Name:
    Dave
    #535 duck.co.za, Jan 30, 2022
    Any progress on the lower dash ?
     
    clean512 likes this.
  11. clean512

    clean512 Formula 3

    Feb 4, 2010
    2,127
    Full Name:
    Josh @jtcarprojects
    #536 clean512, Jan 30, 2022
    Not yet getting caught up on everything else. But spring should be ready.
     
  12. duck.co.za

    duck.co.za Formula 3

    Jan 9, 2007
    1,007
    Cape Town South Afri
    Full Name:
    Dave
    #537 duck.co.za, Jan 31, 2022
    Sounds good looking forward to seeing it .
     
    clean512 likes this.
  13. clean512

    clean512 Formula 3

    Feb 4, 2010
    2,127
    Full Name:
    Josh @jtcarprojects
    #538 clean512, Feb 6, 2022
    rizzo308, 02360spider, 67bmer and 2 others like this.
  14. duck.co.za

    duck.co.za Formula 3

    Jan 9, 2007
    1,007
    Cape Town South Afri
    Full Name:
    Dave
    #539 duck.co.za, Feb 7, 2022
    It would be interesting to see inside one of those joints
     
  15. clean512

    clean512 Formula 3

    Feb 4, 2010
    2,127
    Full Name:
    Josh @jtcarprojects
    #540 clean512, Feb 7, 2022
    The bushing or the ball joints
     
  16. 02360spider

    02360spider Formula 3

    May 27, 2015
    1,753
    Dartmouth
    Full Name:
    Richard oliveira
    #541 02360spider, Feb 7, 2022
    What did the flambloc cost each?

    Sent from my SM-G996U1 using Tapatalk
     
  17. clean512

    clean512 Formula 3

    Feb 4, 2010
    2,127
    Full Name:
    Josh @jtcarprojects
    #542 clean512, Feb 7, 2022
    Lowers are 286 each and the uppers are 200 each. Can't wait to get all this together
     
  18. clean512

    clean512 Formula 3

    Feb 4, 2010
    2,127
    Full Name:
    Josh @jtcarprojects
    #543 clean512, Feb 7, 2022
    veilstylez and 02360spider like this.
  19. 02360spider

    02360spider Formula 3

    May 27, 2015
    1,753
    Dartmouth
    Full Name:
    Richard oliveira
    #544 02360spider, Feb 7, 2022
    Are you doing the swaybar bushings also?

    Sent from my SM-G996U1 using Tapatalk
     
  20. clean512

    clean512 Formula 3

    Feb 4, 2010
    2,127
    Full Name:
    Josh @jtcarprojects
    #545 clean512, Feb 7, 2022
    RANDY6005 likes this.
  21. duck.co.za

    duck.co.za Formula 3

    Jan 9, 2007
    1,007
    Cape Town South Afri
    Full Name:
    Dave
    #546 duck.co.za, Feb 7, 2022
    Bushings , is there a needle roller bearing inside ?
     
  22. mwstewart

    mwstewart F1 Rookie

    Feb 5, 2014
    2,784
    #547 mwstewart, Feb 7, 2022
    The flamblocs are interesting. It looks like Ferrari have changed them again: the first versions were white Delrin with an integral needle roller bearing, and the second revision were without the bearing. First and second had natural colour hard anodising, which looks like a pale gold.

    Type you have been supplied with has black anodising with a black/grey bushing material. It almost looks like reinforced rubber. I haven't seen that type before. It may just be a few minor cosmetic changes, but I'd also like to see inside one.
     
    clean512 likes this.
  23. clean512

    clean512 Formula 3

    Feb 4, 2010
    2,127
    Full Name:
    Josh @jtcarprojects
    #548 clean512, Feb 7, 2022
    No needles but man this are so smooth and tight.
    Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
     
  24. mwstewart

    mwstewart F1 Rookie

    Feb 5, 2014
    2,784
    #549 mwstewart, Feb 7, 2022
    Thanks for the pics. This is interesting- it looks like the new parts don't use Delrin. There's certainly some kind of low friction surface treatment.
     
    clean512 likes this.
  25. RANDY6005

    RANDY6005 Formula 3
    Silver Subscribed

    Jan 9, 2017
    2,271
    Jacksonville
    Full Name:
    RANDY
    #550 RANDY6005, Feb 7, 2022
    That will be one of the best upgrade you have done yet !!! Take a screw driver threw stock flamblocks and spin around bet you can not.
    Biggest advantage with Challenge flamblocks tires will never leave the ground. Control arms move easer up and down much smother.
    IMHO after installed my 360 expected to harsh felt super smooth well planted , good stuff .
     
    clean512 likes this.
Page 22 of 35

Share This Page