Resto Mod 308 | FerrariChat
Buy

Resto Mod 308

Discussion in '308/328' started by robmay4, Feb 15, 2022.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

Page 1 of 5
  1. robmay4

    robmay4 Rookie

    Oct 29, 2021
    45
    Milwaukee
    Full Name:
    Rob May
    #1 robmay4, Feb 15, 2022
    Well guys and Gals I thought I would chronicle my Resto Mod project. I purchased this 81 GTS on bring a traler this fall. It had some rust issues and had an 84 QV transplant. It was rough and in my opinion the perfect starting point for a rather radical make over. What I didn't know and I'm not real happy about it. Appears there may have been a bad head gasket, but I digress.... I will post pictures and updates as we make progress.

    I've road raced, I've built and have worked on cars my entire life. But never a Ferrari! So for this build i'm lucky to have Mike Dusold (Dusold Designs) as a very good and personal friend. As one of the most amazing custom car builders in the U.S. I'm looking forward to what he and I create together!

    Visually, the plan is slam it down with coil overs, fender flares, wide tires, big brakes and a splitter. I'm also 6'4" and there is no way i could fit in the car much less actually drive it. So we are moving the foot box forward, putting in a Tilton race pedal setup, race seats , custom steering column and a detachable wheel. Color will stay red with camel interior.

    Engine has already been delivered to Nick Forza. We are doing cams, bumping the compression and running a full custom built EFI setup with headers and mind numbing exhaust. There may be a turbo or super charger in the future, but no commitments to that just yet.

    I know the purists will hate this and me.. but frankly I'm ok with that. I'm hoping to build the baddest and coolest 308 around. I hope you all enjoy it.... or dont.

    I'll start with the "before" pictures and will add and update as progress is made.



    Image Unavailable, Please Login
     
    Fynmere, Big Swole, aseweepay and 5 others like this.
  2. robmay4

    robmay4 Rookie

    Oct 29, 2021
    45
    Milwaukee
    Full Name:
    Rob May
    #2 robmay4, Feb 15, 2022
    aseweepay and st@ven like this.
  3. st@ven

    st@ven F1 Rookie

    Aug 4, 2008
    3,313
    Germany
    Full Name:
    Steven
    #3 st@ven, Feb 16, 2022
    peterp and aseweepay like this.
  4. Octonion

    Octonion Formula Junior

    Dec 30, 2020
    344
    USA
    #4 Octonion, Feb 16, 2022
    st@ven likes this.
  5. st@ven

    st@ven F1 Rookie

    Aug 4, 2008
    3,313
    Germany
    Full Name:
    Steven
    #5 st@ven, Feb 16, 2022
    With the right mindset any of these car can be turned into nice rides

    the one I showed was in bad shape. Outside for 10 years, engine with broken valves. Etc etc. Look at it now

    as diy guy. These cars are not difficult or expensive to work on
     
  6. Gohigh54

    Gohigh54 Rookie

    Apr 29, 2019
    40
    #6 Gohigh54, Feb 16, 2022
    Exciting. Seems like a perfect starting point. Looking forward to following the process.


    Sent from my iPhone using FerrariChat
     
  7. robmay4

    robmay4 Rookie

    Oct 29, 2021
    45
    Milwaukee
    Full Name:
    Rob May
    #7 robmay4, Feb 16, 2022
    Thanks guys!
     
  8. Saabguy

    Saabguy Formula 3

    Mar 28, 2012
    1,785
    Shreveport, LA
    #8 Saabguy, Feb 16, 2022
    st@ven likes this.
  9. smg2

    smg2 F1 World Champ
    Sponsor

    Apr 1, 2004
    16,320
    Dumpster Fire #31
    Full Name:
    SMG
    #9 smg2, Feb 16, 2022
    Looking forward to this project as well. :cool:
     
  10. AZDoug

    AZDoug Formula 3

    Jun 17, 2009
    1,606
    Along the Verde , AZ
    Full Name:
    Doug
    #10 AZDoug, Feb 16, 2022
    Are you bore/stroking the motor?

    My carb'd NA 3.6L upgrade, using the original block made huge diff in power. I used a 360 crank, its basically a 2V 360 motor, it has the same power/torque curve up to about 6500-7000 RPM, then degrades due to the limits of the two valve heads.
    Doug
     
    ZikZak and cavallo_nero like this.
  11. robmay4

    robmay4 Rookie

    Oct 29, 2021
    45
    Milwaukee
    Full Name:
    Rob May
    #11 robmay4, Feb 16, 2022
    waiting to see / hear about the condition of the motor from Nick. Depending on parts availability and necessity, we will make some decisions on what direction we take from here.
     
    dinogt4guy likes this.
  12. robmay4

    robmay4 Rookie

    Oct 29, 2021
    45
    Milwaukee
    Full Name:
    Rob May
    #12 robmay4, Feb 16, 2022

    Attached Files:

    ChipG likes this.
  13. RodC328gts

    RodC328gts Formula Junior

    Aug 17, 2021
    458
    Mexico
    Full Name:
    Rod C
    #13 RodC328gts, Feb 16, 2022

    Read this thread. The OP mentions where he got his in the US.

    But stay away from the chrome lip. Whole yellow is much better.

    https://www.ferrarichat.com/forum/threads/new-coffin-spoke-wheels-328-gtb.649601/page-2#post-148172609
     
  14. RodC328gts

    RodC328gts Formula Junior

    Aug 17, 2021
    458
    Mexico
    Full Name:
    Rod C
    #14 RodC328gts, Feb 16, 2022


    I like many things from this mod. Except the crooked angled wheels stance! I hate that.
     
    Dino246gt and Plutonium like this.
  15. RodC328gts

    RodC328gts Formula Junior

    Aug 17, 2021
    458
    Mexico
    Full Name:
    Rod C
    #15 RodC328gts, Feb 16, 2022
    eurocarguy101 likes this.
  16. RodC328gts

    RodC328gts Formula Junior

    Aug 17, 2021
    458
    Mexico
    Full Name:
    Rod C
    #16 RodC328gts, Feb 16, 2022
  17. Plutonium

    Plutonium Karting

    Jul 29, 2020
    97
    Full Name:
    1980 308 GTSi
    #17 Plutonium, Feb 16, 2022
    Tail lights?
     
    RodC328gts likes this.
  18. RodC328gts

    RodC328gts Formula Junior

    Aug 17, 2021
    458
    Mexico
    Full Name:
    Rod C
    #18 RodC328gts, Feb 17, 2022
    i saw that. I let it go as an artist concept, but I know it’s not right
     
    Dino246gt and Plutonium like this.
  19. robmay4

    robmay4 Rookie

    Oct 29, 2021
    45
    Milwaukee
    Full Name:
    Rob May
    #19 robmay4, Feb 17, 2022
    Thanks for sharing! definitely some great looks on that. and agree, don't love all the camber ..
     
    eurocarguy101 and Plutonium like this.
  20. derekw

    derekw Formula 3

    Sep 7, 2010
    1,521
    London, UK
    Full Name:
    Derek W
    #20 derekw, Feb 17, 2022
    There are few purists on here as those types frequent a different echelon of the market. We’re just grateful when another car gets saved from being parted out.

    You have to do more than just lower it and get a bigger engine to be the “baddest.” Personally I would go with an interesting colour at the very least.
     
  21. sherpa23

    sherpa23 F1 World Champ
    Owner Rossa Subscribed

    May 28, 2003
    10,008
    Rocky Mountains
    Full Name:
    Bastuna
    #21 sherpa23, Feb 20, 2022
    ZikZak, Fynmere, peterp and 13 others like this.
  22. Alex N

    Alex N Karting

    Mar 29, 2021
    189
    Full Name:
    Vincent Napoliello
    #22 Alex N, Feb 20, 2022
    Cool project, I’m doing something very similar and have already ordered my NTM wheels from Alpha9, mine is a twin turbo 83 QV that will get the EFI treatment, I like some of the styling on the earlier cars and am going to go that route such as euro bumpers, getting rid of the diaper and painting the hood grills body color, and making it look like a B and not an S. I shoul start a thread when I’m further along.
     
  23. JCR

    JCR F1 World Champ
    Silver Subscribed

    Mar 14, 2005
    10,899
    H-Town, Tejas
    #23 JCR, Feb 20, 2022
    Banzairacer and sherpa23 like this.
  24. Vonbarron

    Vonbarron Formula 3
    Owner Rossa Subscribed

    Aug 26, 2014
    2,255
    Westside Mofo
    Full Name:
    S B
    #24 Vonbarron, Feb 20, 2022
    eurocarguy101 and sherpa23 like this.
  25. sherpa23

    sherpa23 F1 World Champ
    Owner Rossa Subscribed

    May 28, 2003
    10,008
    Rocky Mountains
    Full Name:
    Bastuna
    #25 sherpa23, Feb 20, 2022
    I think that all of the FIA Group 4 cars have those. I haven’t seen the other 18 but I have seen 6 or 7 of them (plus mine) and they all have those supports.
     
Page 1 of 5

Share This Page