Solid bushings on 430 Scud or 360CS?

Does the 360CS or 430 Scud have solid suspension bushings?

 

No. The challenge does and thats what I'm putting in

 

do get an increase in road noise or are you just tracking

 

I want the best of everything on my car and do some fun driving. I'm not worried about road noise. I didn't get this car to worry about stuff like that.

 

No.

Challenge bushings are delrin and you will get NVH.

 

Maybe a little why driving but not much. But the feed back is amazing.

 

If you haven’t experienced full race bushings you might reconsider. Remember louder, harsher and most likely very squeaky does not mean better. It just means different.

 

I put full race bushings in my 930 slant nose back in the early 90's. Giant mistake. you could hear me squeaking as I came down the road. No matter what my mechanic did, he couldn't completely stop the noise. I eventually went back to OEM.

 

Delrin does not squeak. Urethane does and that gave a bad rap when people did that in there older muscle cars. And yes most of my cars now and previous owned cars have had not stock bushings either being hyem joint or aftermarket parts. And never had a problem. If you set the car up right and under stand preload where you don't preload the bushings when tighten them i have never had problems. I have been in the aftermarket trade since the early 90s and been building cars my whole life and some people know what there doing. Some people can live with a little NVH and some want a tesla quiet. I can handle it all

 

They are one of the best upgrades I have ever done !! Rubber swells over time and control arms do NOT move freely and could cause them to stick.
They trans form the your suspension very smooth handling and they last for a very long time .

 

oh yea !! they weight a hell of allot less than stock ones almost 20 pounds !!

 

these are the upper and the lower even good bit bigger

 

Image Unavailable, Please Login

 

I put thicker c clips on mine they had way to much wiggle. Image Unavailable, Please Login

Sent from my SM-G996U1 using Tapatalk