355 Wing mirror/window seal...

I noticed my passenger side window seal was folding over when the window was moving up.
Having a quick search on here found me this thread:
Window Seal Replacement | FerrariChat

Thought I'd just add my pictures for anyone facing the same issue...

Image Unavailable, Please Login

Remove the 2 screws holding the wing mirror triangle on (I very much doubt mine are the original screws!

Image Unavailable, Please Login

Recover the foam insert (mine didn't seem to be attached to anything?)

Image Unavailable, Please Login

Undo the 3 wing mirror nuts (10mm), careful not to drop the washers in the door... I used one of those extendable magnet stick things to hold onto it.
Hold onto the mirror before removing the final nut so it doesn't just drop.

Image Unavailable, Please Login

I had to pull the electric mirror connector through the foam seal to undo it.

Image Unavailable, Please Login

And here we are....
What seems clear to me, that this must have happened before, and not fixed correctly, it only had 1 clip on it, (looks like it might have had one on the bottom, but thats missing).
My seal was not recoverable sadly.

Image Unavailable, Please Login

So, I had to buy a new seal, which for a small bit of rubber seal is incredibly expensive...
£200 and a special order from Maranello.
Nevertheless, it needed to be done!

(Part number 63421700 - L.H.Badge Outer Gasket)

Image Unavailable, Please Login

I ordered some "starlock" washers from Amazon, I bought a multi pack, but the size needed is "M4".
I also used some (safe for rubber) super glue to hold the seal on the triangle, and used a small 8mm socket placed over the washer so the pin is cleared in the centre to 'hammer' (one hit with a tack hammer) the star lock washers in place.

Image Unavailable, Please Login

"refit in reverse".
Only thing to be mindful of when refitting, is getting the washer back on the bolts, again I used my extendable magnet thing put it on the bolt and slid the magnet thing to the side so the washer stayed in place.
All done

 

Nice work, believe it or not the screws are the original type.

 

They looked like wood screws!

 

I can't find this part anywhere, does anyone know where I can grab one? Please advise!

 

I got this from eurospares (in the U.K.).

 

This is timely - I watched mine do the same thing a couple of weeks ago. I've been trying to figure out which part I need from the vague-ish line drawings, so thank you!!