Hello everyone, I am looking for wiring diagram for my 1995 355 2.7 EU version. I am sorry but in all threads i found about that there are dead links... I have some trouble with my right rear light (parklight) there is no voltage to the bulb... (i identify yellow wire). Thanks a lot. Cédrik
Both halves of the red ring? Diagram here: https://www.dropbox.com/t/BVwVFc28AgXRu75L I've doubled the thickness of the yellow wire to make it more visible. The wire goes from the light to the passenger footwell relay panel (it passes through the panel) and then goes to the relay/fuse panel in the forward luggage compartment. The connectors on the back of the passenger footwell relay panel are not visible unless you drop the relay panel down (one bolt).
Hi... that 12V should come from: - fuse box frunk: relay F/ Fuse 13 / connector M pin 1 via yellow wire to - fuse box passenger foot well: entering connector A9, internally routed directly to connector D pin 3 then via yellow wire to your light assembly connector pin C. Best regards
Hi Qavion, just answered the same time as you based on my black/white copy. Do you have the colored version of the other diagrams too? In case yes, would you mind sharing? Best regards
Hi Cedrik, probably this information does not help you with your current problem, but still I share it (I had my fingers in there recently). My Swiss 1996 GTB has these REAR OUTER POT (I assume its not any different in France since you are also part of Europe): - MIDDLE bulb is for turn indicator, clear bulb with one filament 21W (still shows orange, even the glass is white,... magic - BOTH OUTER bulbs are also clear and have two filaments (the "thinner/outer" one 5W/thin filament , the "thicker /inner" one 21W/thick filament). These bulbs are shape coded, you can only install the bulb it in one particular orientation (press them down before rotating). - rear lights should illuminate BOTH bulbs on 5W - for the European version: brake light should ONLY illuminate the 21W filament on the outer bulb (fully independent from the 5W rear light). The inner 21W bulb should not illuminate on brake. That is also in line with the wiring diagram. That said: when you install the assembly into the pod, the right side one has to be up-side-down (writing not readable / yellow wire 2nd from top). On the left hand side it must be installed with the writing readable. This ensures ONLY your outer sections of your outer rear pot illuminate while braking. If you do it wrong, you symmetry is gone. - for the US version: they have a different bulb assembly, they use both bulbs 21W filaments when braking. Best regards Image Unavailable, Please Login
Thanks for your replies. I am looking for relay BOSCH 0 332 015 013. Any idea about the replacement number part? Best regards
This is the famous "K-relay". The replacements for Bosch 0 332 015 013 are: Bosch 0 332 015 001 Image Unavailable, Please Login or Bosch 0 332 015 006 Image Unavailable, Please Login
Probably a bit too late to add this advisory, but there appears to be a wiring discrepancy between the OEM diagrams (and mine) and the real car in relation to connector 41052. This connector appears on numerous diagrams (alarm, engine ignition, etc). Refer to post https://www.ferrarichat.com/forum/posts/148767478/ I know quite a few of you have already downloaded the zip package. I'm not sure how we could resolve this issue as I don't have access to a 2.7 F355
Thanks a lot, one more question do you have picture of A9 and D connectors? Where exactly i can found it? Best regards
They are on the back of the passenger footwell relay panel. A is the plug number, 9 is the pin number. See the graphic on the wiring diagram: Image Unavailable, Please Login
Thanks a lot Qavion, now i understand this wiring. just one thing (different subject) but What do you know about the K1 connector? I can't found it on diagram... Image Unavailable, Please Login
K1 is battery power into the relay panel. It's supplied with live battery power from the box with the "+" on it. Image Unavailable, Please Login
Here are my latest F355 wiring diagrams: https://www.dropbox.com/t/k7zLtEv0ONbJ6Fez See @308Jon 's excellent contribution regarding the engine management interconnect plugs: https://www.ferrarichat.com/forum/posts/148792691/ Links expire in 6 days.
