360 WTB cap/plug for front driver carpet

Hey fellas,
Preparing my for judging in the comin months and noticed a plug/cap missing in the interior of my car. There is a hole in the carpet in the driver area by where your left knee/foot would be. It's round, maybe about 2 inches in diameter. Anyone know the part number or a source for this cap/plug? Any help is always appreciated. Thanks.

 

This plug?

Image Unavailable, Please Login

I think that part is 14507987, not 100% sure but that's what it looks like in the parts diagram.

 

I suspect you might be talking about the inertia switch cover. Its a rubber grommet and it is too loose on my car and falls out. From the owners manual:
Image Unavailable, Please Login

Image Unavailable, Please Login
It should be listed in the parts diagrams.

 

If it is the one in Corey's pic above, it is 14507987. Funny, I just put one on order last week from Eurospares, actually ordered 2 so I'd have a backup....

 

I have a spare pm me I just deleted all the carpet in the car

Sent from my SM-G996U1 using Tapatalk

 

What did u pay for it

Sent from my SM-G996U1 using Tapatalk

 

A dollar each!

Needed to order an ECU from Eurospares, so threw them on the order

Shipping is what kills ya

 

How come? What did you replace with?

 

I have been sheading weight removed all the carpet insulation and scrapped all the rubber that was glued down.then 3 coats of trim black.i have scud metal mats going in and custom bride seats on the way Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login

Sent from my SM-G996U1 using Tapatalk

 

Interesting how mine was also missing when purchased, This covers the fuel pump cut off switch which I understand can be reset by pressing from the top down..someone did not realize the plug needs to be removed first..it was laying inside the panel. If not already inspected its worth the inspection.

 

Isn't it suspicious that the plug is missing? I thought the only reason to press reset the switch when the car is in a major accident? Or am I wrong? So unless there was carpet work, the cap shouldn't have been "touched".

 

Corey, You're theory is correct that would be why a reset is needed, if the vehicle is involved in a major accident or roll over fuel delivery is shut down.
However like many misdiagnosis if the vehicle is not starting one may think this could be the reason., if I have no fuel pressure this may be my first option.

 

@02360spider looks amazing, that is going to look phenomenal!

 

Saving all that weight in the car, yet leaving a tin of Altoids. Priceless !

 

Lmoa fresh breath is always needed at cars and coffee

Sent from my SM-G996U1 using Tapatalk

 

If they are like mine, they don't fit very tight and can easily fall out.