Horn button | FerrariChat

Horn button

Discussion in 'Mondial' started by wsendelback, Jan 23, 2023.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. wsendelback

    wsendelback Rookie

    Joined:
    May 12, 2016
    Messages:
    31
    Location:
    Dallas, TX
    Full Name:
    William Sendelback
    The wire from my horn button to inside the steering wheel housing has come loose. Through the hole in the wheel housing, I can see a fitting and am able to shove the wire back into it, but it is not secure. If I remove the surround from below the steering column, will I have access to that fitting to secure the wire? Anyone else had this problem, and if so, how did you fix it?
     
    wsendelback, Jan 23, 2023
    #1
  2. Rifledriver

    Rifledriver Three Time F1 World Champ

    Joined:
    Apr 29, 2004
    Messages:
    37,072
    Location:
    Cowboy Capitol of the World
    Full Name:
    Brian Crall
    Have to take steering wheel off. There is a small metal tab with wire crimped to it and it is riveted to the main switch. Pulling to much on the wire can make it break off right next to rivet. Several ways to fix once wheel is out of the way.
     
    Rifledriver, Jan 23, 2023
    #2
    ronfrohock likes this.
  3. wsendelback

    wsendelback Rookie

    Joined:
    May 12, 2016
    Messages:
    31
    Location:
    Dallas, TX
    Full Name:
    William Sendelback
    Thank you. Will do.
     
    wsendelback, Jan 28, 2023
    #3

Share This Page