360 OBD2 Not working?

I have an engine light on the 360, probably nothing as usual. I use an Innova 3011obd2 which worked fine on the 355 but when I connect to to the 360 nothing happens. I know I have to turn the ignition on (not start the car).
The connector on car is fine as the car was just in shop and the code reader is also fine as I tried it on the Hyundai just to make sure it didn't die.
Any thoughts?
Thanks.

Image Unavailable, Please Login

 

Immobiliser disarmed?

 

How would I be able to check if it is?


Sent from my iPhone using FerrariChat

 

Does the LED near your left knee stop flashing when you push the fob button? Key on immediately after pushing the button or, if the 360 allows it, push the fob button with the ignition key already on.

This is assuming you haven't had an immobiliser delete modification done to your car.

Surely you went through this procedure with your 355?

 

yeah the light stops flashing right after I deactivate the alarm. Strange, car won't trigger the obd2...

 

On my F355, I seem to recall that I had to turn on my scanner after I had disabled the immobiliser. I have an Innova scanner, too.

Has your car had the OBD2 port wiring update? It seems to affect some scanners on some cars. i.e. there should be a spliced black wire at the back of the OBD2 port. It's spliced with a red(or brown?) "Scotchlok"

 

Any fuses blown? I seem to recall it’s on the same circuit as either the cigarette lighter or the lights in the door/glovebox.

 

Also the dome light.

Image Unavailable, Please Login

 

funny enough, you're right, the cock, glove compartment light and light next to clock are out. Can I fix this myself?

 

funny enough, you're right, the cock, glove compartment light and light next to clock are out. Can I fix this myself?

 

Replace fuse and pray that you don't have a short somewhere

It's a blue, 15 amp fuse

 

Where can I get these fuses? Are they generic?


Sent from my iPhone using FerrariChat

 

Any Automotive store.... NAPA, O'Reilly

Very generic. ATC/ATO size.

https://www.napaonline.com/en/p/BK_7822184?impressionRank=1

 

OMG I DID IT lolllll. It was the 15 fuse, and thanx to you all I fixed it, the four beep sound is gone, clock is on, obd2 works now, glove and dome light is on. Thnx @quavion for the fuse chart that made the difference. I was about to order a fuse then, CAN YOU BELIEVE IT, I THOUGHT TO MYSELF WHY NOT CHECK IN THE FERRARI 23 YEAR OLD TOOL BAG LMFAOOOOOO AND SURE ENOUGH THERE WERE FUSES IN THERE! HAHA WHEN HAVE YOU EVER THOUGHT THAT TOOLBAG WOULD ACTUALLY SAVE THE DAY!!!!!!

 

I have used my toolkit too. I also found it hilarious when doing so.

I was also like well don’t you know it does serve a purpose other than being a paperweight.


Sent from my iPhone using FerrariChat

 

Looks like I gave you wrong directions on fuse type. I assumed they were standard size, but they look smaller.

Are the blades on the fuses rectangular or pointed?

https://en.wikipedia.org/wiki/Fuse_(automotive)#/media/File:Electrical_fuses,_blade_type.svg

(EDIT: Or are they low profile with rectangular blades?)