Best price for 360 / 430 rotors

For the best price on OEM rotors, reach out to A W Auto Parts in NJ. Including a 15% FCA discount, I was able to get a PAIR of rotors for around $320 !! This compares to ~ $680 from a West coast supplier.

Reach out to Stacey at 732-542-5600 ext. 19 and she'll set you up. She's very knowledgeable and informative.

 

Superperformance in uk do brembos for £75 to £100 ea for 360/430

 

430 discs are a different part to 360 - 360 can be bought cheap but the 430 items are a metal matrix and should be sourced from the dealer.

It's worth the extra as the non-CCM brakes are marginal at best with the extra performance of the 430.

 

+1 for Superformance. I just got 4 new brembo for ~100 bucks a pop. You do need to factor in shipping and other fees from UK, mine was bundled in a large order so the added fees and shipping per item was less. Only took a few days to arrive. Very fast.


Sent from my iPhone using FerrariChat

 

They have a few listed, i think there is a dearer one
The steel 430 discs look tiny compared to the ccm

 

Thats a deal, thanks for the helpful post, I might need to take this person up on the offer if I decide against going CCM!

 

The difference between the Brembo and Ferrari PN is just the ring of gray high temp paint to prevent rust. Ignore the middle PN.

Image Unavailable, Please Login

I just painted the Brembo rotors with black high temp paint in that area. I would also recommend spraying the outside of the rotors after taping the brake contact area.

 

Guys..saving money is a wonderful thing. But please don't skimp on brakes. Buy the OEM stuff from the dealer. It's really not that expensive.. in fact steel brakes on a 360/430 are cheaper than the average Benz. There are places to save money..but please not here.

 

Brembo is the OEM

 

I spent 400 on a set of 4 a few years back by ordering from the UK

 

What a joke, Brembo is the OEM.

Dealerships price gouge because the rotors are put into a yellow box with a horse on it instead of the black and red Brembo box. Same exact part.

Next you'll tell us only to use the absolutely hopeless OEM pads that give up after 3-4 heavy braking zones and cost $500/set.

Dealer here in Atlanta wanted $5k for front pads and rotors and you can do the job with OEM or better than OEM quality parts for about 1/8 of that.

 

5k for front pads and rotors? That is absoulty ridiculous. I buy my brakes from the dealer and have NEVER seen prices like that for iron brakes. I usually can do all 4 pads and rotors for about 3500 CND and the would include a fluid flush. That dealer must have made a mistake with the quote..

 

Apologies, it was all 4 corners.

Still absolutely ridiculous given the rotors are $115/ea and better than stock pads are $90/axle. And the dealership uses very basic DOT4 fluid that doesn't hold up to hard braking, unlike RBF660 or similar.

 

I was quoted $5281.59 for valve cover gasket replacement in CA at the dealership. I got it done as part of the EAG swap for a lot less (much less than half the quote)