3500 valve shims | FerrariChat

3500 valve shims

Discussion in 'Maserati' started by redfred84, May 23, 2023.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. redfred84

    redfred84 Formula Junior

    Joined:
    Dec 24, 2010
    Messages:
    734
    Location:
    SF Bay Area, USA
    I seem to remember another car manufacturer that used the same valve shims as the 3500? Was it a certain model Jaguar? Or am I dreaming?
     
  2. thecarnut

    thecarnut F1 Rookie Rossa Subscribed

    Joined:
    Apr 22, 2006
    Messages:
    3,230
    Location:
    Atlanta
    Full Name:
    The Car Nut
    Jaguar XK engine shims (E-type, XJ6, etc) have the same diameter but are thinner. In many cases they will work.

    Ivan
     
  3. Joe186

    Joe186 Rookie

    Joined:
    Nov 12, 2014
    Messages:
    28
    Terry's Jaguar Parts in Kalamazoo, Michigan sells oversize Tappet Shims in various thicknesses (Thicker than stock Jag sizes). I purchased them for my Sebring Engine rebuild some years back.

    Joe
     
  4. redfred84

    redfred84 Formula Junior

    Joined:
    Dec 24, 2010
    Messages:
    734
    Location:
    SF Bay Area, USA
    Thanks! Great to hear! I just got an XK 120 too! But I haven't gotten that far into it.

    Many Thanks, RF.
     
  5. redfred84

    redfred84 Formula Junior

    Joined:
    Dec 24, 2010
    Messages:
    734
    Location:
    SF Bay Area, USA
    Terry's Jaguar Parts in Kalamazoo, Michigan sells oversize Tappet Shims in various thicknesses (Thicker than stock Jag sizes). I purchased them for my Sebring Engine rebuild some years back.

    It appears that Terry's Jaguar parts are no more!
     
  6. Joe186

    Joe186 Rookie

    Joined:
    Nov 12, 2014
    Messages:
    28
    That's Stinks, they still have a website, but it appears the number is disconnected.. Some of the other Jag parts suppliers had a few oversize tappet shims, but Terry's by far had the most abundant offering at a reasonable price. I wonder if another parts supplier bought up their stock. Terry's was owned by Engle Imports, but their number also appears to be disconnected. Sorry for the false lead.

    Joe
     
  7. Joe186

    Joe186 Rookie

    Joined:
    Nov 12, 2014
    Messages:
    28
    It appears that Engle Imports has another company
    EnglishParts.com
    5775 Venture Park Dr, Kalamazoo, MI, 49009
    866.467.1776

    They have tappet shims on their website and most likely have Terry's stock. You have to search for Tappet Shim, as I couldn't find them on the normal engine parts page. The listing seems shorter than what Terry's had some years back

    Good Luck

    Joe
     

Share This Page