Exhaust switch for exhaust controller?

Decided to get the Forza exhaust controller but don't want to have a key fob flying around the cabin. Came across this item from Sticky RX: https://store.**********.com/products/custom-ferrari-2-position-exhaust-switch

Image Unavailable, Please Login

Is anybody using this and is it possible to repurpose a standard rocker instead? I have a spare storage door switch I was going to use to do the garage door opener mod, but think an exhaust switch might be of more frequent use and would like to use my extra space for it instead. At $300 though, I'm wondering if there is an easier way to make this work.

Side note, we need a vendor to sell just the pictogram inlays for custom mods.

 

This is good info. Do you know of other switches that might be latching versus momentary? I guess I could fit a latching relay as well, but that's kind of a pain.

 

Purchased a used 575 dome light switch. Will report back.

 

@285ferrari helped me out in getting one of these "EXHAUST" labels for the moment:

Image Unavailable, Please Login

However, I'll be working with him to get a graphic made to keep with the theme of the other buttons but that will take a bit longer as the place that creates these is a bit backed up. I don't care for the Porsche style logo used in the first post example, so I hope to get a graphic of this one:

Image Unavailable, Please Login

Not sure which car that came off of, but I feel like it fits our vehicles better. Need to brush up on my graphics skills to get a good vector made up. If anybody has any free time and wants to help out, feel free to chime in

 

That’s Robbie’s mat. I’m too much of a style whore to have a Glock

 

That’s good to know. I already bought a 575 done light switch off eBay though for $50.

 

Hmm. I wonder if they sell just the stickers in the Ferrari switch size.

 

Not off the shelf, you'd have to buy a pigtail from an OEM harness and tie into that. Some wire loom and heat shrink go a long way to make some spade connectors look good though.

You could get this and cut off one of them: https://www.ebay.com/itm/153985916251?hash=item23da469d5b%3Ag%3A2TEAAOSwO5te99or&amdata=enc%3AAQAIAAAA8CN9fHpryAex42FHNFHS4ftLsSrbJ0xo95mTVDPPxPMlBaB24gGttlPN7T2FYck9j6M5JAoMoI15NrpadIBfgE5FWwctExw7eevuNjBOE1snxCtWjxEIHtM3yS9Gt5iDMyj3WdgEfBZ0coFni0me0Ze0YipY346u%2BBxlHEmoFLRjrgrFh2nv4RyqYlNJPlcJlU2GkYZnZnyJeYYprB%2BItQhGr%2BGl8iJMB9%2BF2z36BGq5n3Apz4aDrTUwPKjje4397aeSQT8ilz3TyACqz3OB%2BR8OxHbPwtFf3Jd3Sq4R3WojoH4RVLSYgtlYI%2FifK%2BVkLA%3D%3D%7Ctkp%3ABk9SR9K6kembYg&LH_ItemCondition=4

 

I haven't looked around back there yet. I need to get an illumination and ground wire by either jumping it off one of the other switches or through an unused harness (like if there's a fog light end that's active). Not sure where the controller is typically mounted

 

183233 but that's according to the listing person on eBay. Not sure if that's correct. This is the one I bought: https://www.ebay.com/itm/304520203500

If you end up buying that harness, I'll buy one of the ends off of it from you for $25

 

Cool, my offer stands on the plug end. Let me know once you get it if you're interested.