Maserati 3500GT | FerrariChat

Maserati 3500GT

Discussion in 'Maserati' started by Bruni92, Aug 1, 2023.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Bruni92

    Bruni92 Rookie

    Joined:
    Jun 20, 2018
    Messages:
    2
    Full Name:
    Jim Bruni
    Hi,
    I'm restoring a 1962 Maserati 3500 GT, AM 101.1048 and need information about the insulation, particularly the fire wall and foot well insulation. They seemed to use a lot of regular fiberglass and jute, some in the engine compartment was covered with fiberglass matts. Is it important to use similar products or more modern, better products? Then keep the outward appearance similar to the original.
    Thanks,
    Jim
     
    Bruni92, Aug 1, 2023
    #1
  2. wbaeumer

    wbaeumer F1 Veteran Consultant

    Joined:
    Mar 4, 2005
    Messages:
    8,987
    Email Sent
     
    wbaeumer, Aug 1, 2023
    #2
  3. redfred84

    redfred84 Formula Junior

    Joined:
    Dec 24, 2010
    Messages:
    734
    Location:
    SF Bay Area, USA
    It would probably behoove all of us if answers/solutions were made public?
     
    redfred84, Aug 2, 2023
    #3
    Aramon likes this.
  4. Heymj73

    Heymj73 Rookie

    Joined:
    Jun 24, 2019
    Messages:
    20
    Full Name:
    Mathew Jonston
    Agreed as I have a very similar need for my ghibli. A lead on a solution for a 3500gt might help me assuming similar products used.
     
    Heymj73, Aug 2, 2023
    #4

Share This Page