F8 Does anyone know? Help

Image Unavailable, Please Login Image Unavailable, Please Login

Removing the 5 screws is easy but this thing seems to be tight in place and won’t let go of the panel. Anyone know how to remove this? Or what kind of fastener it is? Hmmm [emoji848] Thank you guys.


Sent from my iPhone using FerrariChat

 

One side popped right off but this side won’t budge


Sent from my iPhone using FerrariChat

 

Both acorn nuts need to be removed…take off each side engine covers first. That back panel should then pull off by bending each side so that the panel clears each of the horizontally positioned screws. I also picked my entire set {same as the F8 design} at MyRicambi. I cut into place more insulation as the extreme heat over time can discolor the CF. I was not comfortable with the thin insulation that came with the engine covers.

 

Ah thanks man and I just figured it out too- there’s a 5/16 nut on the passenger side and just took it off.. drivers didn’t seem to have to do anything.

I did drop one of the little Torx bits down somewhere and can’t find it, even with a pole magnet — ugh..


Sent from my iPhone using FerrariChat

 

Interesting about the insulation— I’m gonna just install as they are and hope I guess.


Sent from my iPhone using FerrariChat

 

Hmmm. Pealing off the original seals/rubbers to stick on to the carbon ones doesn’t seem to be as easy as I was told- sh*t, I hope I didn’t have to buy the new ones


Sent from my iPhone using FerrariChat

 

I dropped one of the acorn nuts also lol. I reused the original seals; Once the side panels buttress against the engine bay frame, they snug up nicely.

 

I wonder where my torx bit went? It didn’t make a lot of noises- like it went click and that’s it— I’ll gosh around some more before I put the panels back on but hopefully it wont hurt anything.

And ya, I just put some 3M tape along new ones and re-applied the seals to the carbon panels. Done and they’re ready to go back in.

Certain order? Side first or back is prob ok?

Thanks for the help and support bud


Sent from my iPhone using FerrariChat

 

Son of a B*tch!!!! I just spent hours removing and redoing seals (and fishing for torx bit and a washer) and go to put them on and— they aren’t the right f’ing ones! Now what the hell do I do? So mad.. gotta wait months again for them to be made? Can I drive car like this without panels? So upset.
Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login View attachment 3577721

Seems to fit everywhere except over the intake tubes… arch is different


Sent from my iPhone using FerrariChat

 

Where did you get them
?

That sucks and yes you can drive without them... just keep it out of the rain..

 

MyRicambi


Sent from my iPhone using FerrariChat

 

Waited a long time for them [emoji24]


Sent from my iPhone using FerrariChat

 

I’m really hoping he got multiple sets in and just gave me the wrong ones (perhaps for 488) as he said F8 and Pista are the same but 488 is diff. Will see when he responds in the morning


Sent from my iPhone using FerrariChat

 

What brand are they? I wonder which car it's for? Obviously not the f8.

 

That's what I was thinking too.

 

Surprised they screwed up…..Denis doubled checked mine and unpacked to check for flaws ect. They should be able to fly in a set by fedex. If you drive it without the covers open the bonnet when you park it.

 

Why open the bonnet?

 

Pretty amateurish of MyRicambi

 

I’d reinstall the trim panels, if for no other reason to allay any concerns regarding the effect of excessive direct heat on the Lexan.


Sent from my iPad using FerrariChat

 

I could make that work. I got a Sawzall.

 

Seems like you got the wrong part. I got mine from SRM Autosports
You can spot the differences in both parts

Image Unavailable, Please Login
Image Unavailable, Please Login

 

Ya def wrong part. Denis said he’ll call me this morning. We will see if there is a resolve.

I’m still dying to know why I should open the bonnet if I have to drive it when I park it. Maybe he means to open the engine cover. Denis did say once the carbon is installed to pop the cover when I park to let the heat out more to help preserve the carbon from discoloring.

I don’t see anything under the covers that is going to make more heat on the lexan. It’s not like the covers are there to absorb the exhaust heat, they’re just there to cover wires, hoses and things to neaten things up. And lexan can handle it, I’m sure.

It looks kinda cool without them I guess- just wish I could find that Torx bit tip thing I dropped in there…. Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login


Sent from my iPhone using FerrariChat

 

You can drive it. Just don't get in any water

 

Yes I meant rear hatch….Denis will tell you also that to preserve the integrity of the CF color leaving the rear hatch/cover open after a hard drive is recommended.

 

Yeah. That will turn ugly real quick. The carbon fiber on my f430 yellowed and bubbled pretty bad.