Its a long shot, but I just thought I would put it out there.. Does anybody know what type of connector Ferrari used in the adjustable suspension actuators..? Thanks in advance... Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
Appears to be the same as the connector used on the Vescovini 348 exhaust temperature controllers: Image Unavailable, Please Login The only similar (but not exactly the same) connector I could find is this Delphi Metri-Pack 150 Series: Image Unavailable, Please Login I bought it at: https://www.ebay.com/itm/352819885265
I haven't research your specific one but the color of the seal and the year of car makes me thing delphi/aptiva
Goodness Miroljub I realy wasn't expecting much of an answer from that hail Mary ....but I think you got it!! That looks to be the ticket.. It has also assisted me to know where item D in the above photo goes.. I found it loose amongst the wiring harness at the bottom of the trunk space.. and I was wondering what it was..? Clearly its part of the connector.. Can you confirm it mates up to the 348 Vescovini unit..?
No because I have not tried it on, just keeping as spare. As you can see, the steps at the sides of Delphi plug are positioned a bit differently than those on the Vescovini plug so you will probably not be able to mix the halves of the connectors. If you need to replace any half of your connector, you probably need to replace both sides with Delphi. If the male and female pins are the same, you can just transfer them into the Delphi connector bodies.
