355 - Fabspeed Headers 5.2 - repair or sell? | FerrariChat

355 Fabspeed Headers 5.2 - repair or sell?

Discussion in '348/355' started by huzilulu, Oct 21, 2023.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. huzilulu

    huzilulu Formula Junior

    Joined:
    Apr 20, 2011
    Messages:
    340
    Location:
    Houston
    Full Name:
    Huzi Husain
    Hey Guys

    I bought a set of new Fabspeed Headers from a seller (not fabspeed/retailer) and received the kit recently …

    everything is there - both headers, heat shields, hardware… the only problem is one of the end tubes is damaged … Pls see the pics below

    Is this something easily fixed at an exhaust shop / or will working on this cause metal fatigue once hot gasses start running through it ?

    the kit is complete and new, so I’m debating on whether to fix and use, fix and sell or just return back to seller if not worth it?

    suggestions ??
    Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
     
  2. johnk...

    johnk... F1 World Champ Owner

    Joined:
    Jun 11, 2004
    Messages:
    11,221
    Location:
    CT
    Full Name:
    John Kreskovsky
  3. jimmym

    jimmym Formula 3

    Joined:
    Sep 30, 2008
    Messages:
    1,990
    Location:
    Northeast U.S.
    Full Name:
    Jim
    That wouldn’t be a difficult fix. You could do it or an exhaust shop/metal fabrication shop could fix it.
     
    huzilulu likes this.
  4. Fabspeed Motorsport

    Fabspeed Motorsport F1 Rookie Sponsor

    Joined:
    Feb 5, 2009
    Messages:
    3,137
    Location:
    Fort Washington, PA
    Full Name:
    John S
    Hey OP,

    I'd be more than happy to have that damaged side come into HQ and we can do what we can to get it straightened out. I will shoot you a PM!
     
    INRange and lanab like this.
  5. Targatime

    Targatime Formula 3

    Joined:
    Feb 22, 2014
    Messages:
    1,449
    Location:
    Los Angeles
    Super super easy 5-min fix at your local muffler shop.
     
  6. yelcab

    yelcab F1 World Champ Consultant

    Joined:
    Nov 29, 2001
    Messages:
    13,553
    Location:
    San Carlos, CA
    Full Name:
    Mitchell Le
    While it's a great PR thing for Fabspeed to offer the repair, I think if you drive it down to a local exhaust shop, it will cost you $20 and 10 minutes. They knock it out a bit, insert a pipe spreader and a couple of turns of the wrench later you are done.

    Packing it back up and shipping it to Fabspeed would cost $100 (no insurance) and $300 with insurance.
     
  7. lanab

    lanab Formula Junior

    Joined:
    Feb 21, 2016
    Messages:
    510
    Location:
    Stockholm, Sweden
    The seller should have packed it better.
     
    308 GTB likes this.
  8. huzilulu

    huzilulu Formula Junior

    Joined:
    Apr 20, 2011
    Messages:
    340
    Location:
    Houston
    Full Name:
    Huzi Husain
    Thanks guys! and Thanks to Fabspeed for the offer - although I didn't even buy it from them! Super Customer Service...

    I will get the local muffler shop to fix it
     

Share This Page