Instrument cluster connctors | FerrariChat

Instrument cluster connctors

Discussion in 'California(Portofino)/Roma(Amalfi)' started by Klas, Dec 10, 2023.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Klas

    Klas Formula Junior

    Mar 17, 2014
    364
    Gothenburg, Sweden
    Full Name:
    Klas Nilsson
    How exactly to loosen the two connectors in the back of the instrument cluster unit? There is most likely a locking pin in the middle top of each connector but how to open? I pressed here and there carefully but can’t get them loose. Pls advice needed.


    Sent from my iPhone using FerrariChat
     
  2. richkh

    richkh Rookie

    Jul 25, 2023
    30
    UK
    Full Name:
    R H
    There are tabs that you press down at the top of connectors. The connectors are quite tight in so you have to press and pull with a bit of effort.


    Sent from my iPhone using FerrariChat
     
    Klas and Willl like this.
  3. davidtopp

    davidtopp Karting

    Jun 7, 2019
    82
    UAE
    Full Name:
    David Topp
    Klas and Willl like this.
  4. Klas

    Klas Formula Junior

    Mar 17, 2014
    364
    Gothenburg, Sweden
    Full Name:
    Klas Nilsson
  5. Klas

    Klas Formula Junior

    Mar 17, 2014
    364
    Gothenburg, Sweden
    Full Name:
    Klas Nilsson
    I mean, is it to push the black middle knob just down?


    Sent from my iPhone using FerrariChat
     
  6. Klas

    Klas Formula Junior

    Mar 17, 2014
    364
    Gothenburg, Sweden
    Full Name:
    Klas Nilsson
    Managed to disconnect. Really awkward…


    Sent from my iPhone using FerrariChat
     
  7. Klas

    Klas Formula Junior

    Mar 17, 2014
    364
    Gothenburg, Sweden
    Full Name:
    Klas Nilsson
  8. Klas

    Klas Formula Junior

    Mar 17, 2014
    364
    Gothenburg, Sweden
    Full Name:
    Klas Nilsson
    No one here knows how to open this connector carfully?
     
  9. SVCalifornia

    SVCalifornia F1 Rookie
    Rossa Subscribed

    Mar 28, 2011
    2,571
    Silicon Valley
    Full Name:
    Keith
    It just inserts straight in. Remove carefully by pulling it straight out. Should not require much effort.

    SV
     
  10. Klas

    Klas Formula Junior

    Mar 17, 2014
    364
    Gothenburg, Sweden
    Full Name:
    Klas Nilsson
    MacNugget, richkh and Willl like this.

Share This Page