OEM floor mat clips - source?

I've got the OE floor mats in my 550 and they're in great shape. Unfortunately, a couple of the clips that hold them in place are broken. These are the twist style and they're actually riveted to the floor.

I've searched quite a bit (including Ricambi's site) but no luck. Anyone?
Image Unavailable, Please Login
Image Unavailable, Please Login

 

Hi Mink, I don't know where you are located, but I'm in Europe and I found some turnbucked in the UK at a company called Car Builder Solutions. Car Builder Solutions - Kit Car Parts, Tools and Accessories
They have two products TBSB a short Black Turnbuckle and TBLB a long version. The short is slightly shorter and the long is slightly longer than the Maranello parts, but it is difficult to see once they are in position. I purchased bothe sizes but elected to use the short version in the car. I drilled out the pop rivets holding the old turnbuckles and used small stainless steel self taping screws, purchased via an aviation parts supplier, to hold the new turnbuckles in place.
The above products appear better quality than the original Ferrari parts.
Just to add I have no relationship with CBS other than as a customer.
Nigel

 

I just ordered a set from Ricambi. $20 for the whole car.

 

On the same line does anybody know whether there are sources for the mat plastic rings? Mine have a few rings missing...

 

Link? I couldn't find them on their site.

 

We have them in stock here:

63698100 CARPET HOLD DOWN SET : Ricambi America

.

 

The 575 uses different clips. They are here, as #11 and #12:

Ferrari 575M Parts : Table 113 - PASSENGERS COMPARTMENT UPHOLSTERY AND CARPETS

EDIT..... if you have a 360, they are seen in the photo below (all available on our site):
Image Unavailable, Please Login

 

Thank you!

 

@Ricambi America can't tell you how much time this just saved me - thanks for posting the parts numbers!

 

Your lucky! I am still trying to hunt 64462400 (#27) screw caps for my 456M without luck.

https://www.ricambiamerica.com/car-diagrams/ferrari/v12/gt-group-2-2/456m/front-seats-and-seat-belts.html

 

For the last several cars, I've had Cocomats (the company in South Carolina) make custom sisal or wool mats for my cars. They do a great job, however they could not duplicate the flat twist eyelet part in the mat itself. Does anyone know where these are available?

 

Do you sell factory floor mats as well?

 

No, we do not sell any floor mats. We recommend https://exoticare.ca/ for amazing aftermarket/bespoke options, or https://www.lloydmatsstore.com (ultimats) for a budget-priced alternative.

 

The link didn't work for me in the Ricambi post, but I did a search on their page and I see the "carpet hold down set" includes both pieces, the floor and carpet attachment pieces. Thanks.

 

Yes, I need a set of clips for the Ferrari 430 spider if you have them! Please private message me.

Thanks

 

The plastic threaded screw thing is Ferrari p/n 66233300. They're about $5.00 each if I remember correctly.

But heads up... we're closed until late tomorrow (Monday) and the website is offline until then. It sucks, but it was critically important for me to be '100% present' for some personal stuff this weekend.