Is EAG gone | Page 6 | FerrariChat

Is EAG gone

Discussion in '360/430' started by Tbailey, Feb 17, 2024.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. honda corse

    honda corse Karting
    Rossa Subscribed

    Jul 20, 2011
    160
    Vancouver & Whistler
    Full Name:
    mark buchmann
    Its obvious (to me at least) EAG 2.0 will resurface to support existing and future 6 speed conversion customers, there just too many of us and too much money invested on both sides for this to go up in smoke.
     
  2. kestrou

    kestrou Formula 3
    Rossa Subscribed

    Jan 22, 2023
    1,520
    Danville, IL
    Full Name:
    Kevin E. Stroud
    You may be right, but… this has definitely diminished the market…

    In the back of my mind I was thinking, you know, once I get all the noodling bits sorted on my F1 F430 Spider, maybe I’ll do the manual conversion…

    But now? No way in hell!

    Kevin
     
    Texas Forever and ditpixs like this.
  3. Fred Daniali

    Fred Daniali Karting

    Jul 23, 2019
    126
    Chino Hills California
    Full Name:
    Fred Daniali
    No he's not, he is an honest man! Never compare him to Art, who is a criminal.
     
    Johnv10 and Plainview like this.
  4. Fred Daniali

    Fred Daniali Karting

    Jul 23, 2019
    126
    Chino Hills California
    Full Name:
    Fred Daniali
    Dan is a good man and very honest. Art is a criminal!
     
    Cordero, Plainview and CoreyNJ like this.
  5. honda corse

    honda corse Karting
    Rossa Subscribed

    Jul 20, 2011
    160
    Vancouver & Whistler
    Full Name:
    mark buchmann
    The EAG kit is rock solid. I just converted my car over the winter by a local shop. The car drives like it’s from factory. I chose EAG because the kits been around the longest, included cluster / ECU updates, shift column deletes and parts are beautifully crafted. I would say find a suitable shop first, the magic is in the installation.
    I wouldn’t let this saga deter you from taking the leap, there’s other kits in the marketplace.
     
    fossilfuel, Plainview and kestrou like this.
  6. Ferrari 308 GTB

    Ferrari 308 GTB F1 Veteran

    Feb 21, 2015
    8,035
    Tropical
    Is Dan the bloke with the really creepy fixed grin? used to try work on his own 430 ?
     
    Mercedes_Benz, Gaius and craze like this.
  7. CoreyNJ

    CoreyNJ Formula 3
    Silver Subscribed

    Apr 17, 2006
    2,441
    New Jersey Shore
    Dan really is just a "Normal Guy" who came from IT and is trying to make a living with his love for cars. Does he make rookie mistakes? Sometimes. He really was a "green" in the entrepreneur game when he got involved with EAG and as he said in the video got EAG investors and customers where he really felt obliged to stay and try to make them whole. That is the sign of a "good-guy". Should he have smelled something wrong with Art and EAG? Maybe, but Art did get some seasoned investors involved and they all, Dan included, had better attorneys than Art. In Dan's case, he may have some monies owed and in the investor's case, they may own what was taken. I say "may" as there are three sides to every story (thank you Kurosawa) and who knows what the entire truth actually is.

    I agree with Dan's assessment that he shouldn't bother suing. It will be throwing good money after bad unless EAG emerges from this as the same entity and in good financial shape where he can actually collect something. Both of which I doubt. It's just too easy to close the old entity and start a new one. Even the government did that with GM. The GM before the government bail-out is not the same entity as GM today. Sorry not intending this to be P&R, it's just a fact of how business is done.
     
    Cordero, LVP488, Plainview and 4 others like this.
  8. bamaman

    bamaman Formula Junior

    Nov 27, 2015
    939
    Mobile Alabama
    Full Name:
    William M (B.J.) Lyon, Jr.
    The other kits are knockoffs of Art's design and without the Trev ECU software reflash are, how shall we say, definitely problem prone.
     
    honda corse likes this.
  9. imahorse

    imahorse F1 Rookie
    Silver Subscribed

    Nov 25, 2017
    4,338
    WI
    Full Name:
    Dustin
    Please enlighten us about how the oem based kits are EAG knock offs from an objective engineering standpoint.

    Sent from my toilet using FerrariChat.com mobile app
     
    DOWORKFCAR, Gaius, Toonfosi and 4 others like this.
  10. bamaman

    bamaman Formula Junior

    Nov 27, 2015
    939
    Mobile Alabama
    Full Name:
    William M (B.J.) Lyon, Jr.
    Those of you inferring or stating that Art stole from EAG without evidentiary confirmation is libelous and frankly stupid. Defaming someone on rank speculation has made lawyers wealthy and financially crushed the perpetrators. When the true facts are revealed about the management coup and financial affairs some may be running for the hills.
     
  11. bamaman

    bamaman Formula Junior

    Nov 27, 2015
    939
    Mobile Alabama
    Full Name:
    William M (B.J.) Lyon, Jr.
    What is the setup problem--mechanical, tuning or both?
     
  12. imahorse

    imahorse F1 Rookie
    Silver Subscribed

    Nov 25, 2017
    4,338
    WI
    Full Name:
    Dustin
    Weren't you in another thread a while back talking about how 2 years after the delivery date that you still didn't get your car back and that Art ghosted you?

    Why are you going so far to defend someone that treated you so poorly?

    Sent from my toilet using FerrariChat.com mobile app
     
    Fred Daniali likes this.
  13. dm_n_stuff

    dm_n_stuff Four Time F1 World Champ
    Lifetime Rossa Owner

    Dec 10, 2003
    43,711
    26.806311,-81.755805
    Full Name:
    Dave M.
    Are there any FALSE FACTS? Nah, there are not.

    There are truths and falsehoods, that's it.

    "True facts" is redundant.

    Image Unavailable, Please Login

    :D

    D
     
    sbenus, PPW, Gaius and 1 other person like this.
  14. Qksilver

    Qksilver F1 Rookie
    Silver Subscribed

    Feb 11, 2005
    4,550
    PC, UT
    Full Name:
    Joe
    Attempted preservation of value perhaps? Pretty devastating if the market stays away from EAG converted cars with a 10ft pole…

    Also, my interpretation of the Investor’s post in the other thread is that they will stand behind the cars that were converted under their tenure but cars done before they entered the business may be SOL? That would destroy those values; I imagine their valuation methodology would be current value of an EAG converted car in F1 form minus the labor + software to revert back to F1. Plus/minus on a case by case basis.
     
    imahorse likes this.
  15. RedNeck

    RedNeck F1 World Champ
    Silver Subscribed

    Jul 8, 2016
    12,259
    The CSA
    Full Name:
    Me
    So the top is a knock-off of the bottom?
    [​IMG]

    For reference, here is the Ferrari one, from my car:

    [​IMG]

    So....
     
    robst, LVP488, Flea7 and 10 others like this.
  16. Qksilver

    Qksilver F1 Rookie
    Silver Subscribed

    Feb 11, 2005
    4,550
    PC, UT
    Full Name:
    Joe
    There is no debate there. Doesn’t take a rocket scientist to compare those units.
     
  17. imahorse

    imahorse F1 Rookie
    Silver Subscribed

    Nov 25, 2017
    4,338
    WI
    Full Name:
    Dustin
    I think a lot of people, especially in the Ferrari world, and especially those without a mechanical background, think that paying more is giving them a better product. While that may oftentimes be the case, it is not every single time.

    Sent from my toilet using FerrariChat.com mobile app
     
  18. Ferrari55whoa

    Ferrari55whoa F1 Rookie
    Owner Rossa Subscribed

    Dec 21, 2005
    3,374
    Los Gatos, CA
    Full Name:
    Eric
    #143 Ferrari55whoa, Feb 24, 2024
    Last edited: Feb 24, 2024
    ***in the voice of forest gump**** “I’m not a smart man Jenny”….

    me neither….

    just so I’m crystal…. I can see

    Top = Dr S (on my phone that looks nice).

    Middle == assuming 1st gen EAG (functional if not pretty)? I thought the whole tower was multi-piece cnc now?

    Bottom = OEM
     
  19. ttforcefed

    ttforcefed F1 World Champ
    Rossa Subscribed

    Aug 22, 2002
    19,255
    Wasn’t this discussed way back when and the conclusion was outside of the aesthetics there is no functional difference? Please correct me if I’m wrong
     
    bamaman and Zed82 like this.
  20. flash32

    flash32 F1 Veteran

    Aug 22, 2008
    6,895
    Central NJ
    Full Name:
    Dominick
    Yes

    I am think to say Dr s copied EAG is probably wrong ..he copied OEM ..anyway ..this was discussed and done with on another thread

    Sent from my moto g power using Tapatalk
     
  21. ttforcefed

    ttforcefed F1 World Champ
    Rossa Subscribed

    Aug 22, 2002
    19,255
    at this point it’s just killing brain cells anyway… There is no doubt Dr. S had their hands on an EAG kit and there’s nothing foul play about that… Dr. S surely benefited from the R&D mistakes EAG made along my way… Again there’s nothing foul play about Dr. S evaluating EAG’s product.

    Personally I give Art credit was for scaling and getting kits made in size during Covid which was a feat in and of itself. I also give Art credit for getting the first scud fully functional, which would not have been possible without his partnership with Trev… There are at least two other scuds that had to go back to F1 because they couldn’t crack the Ediff problem.
     
  22. imahorse

    imahorse F1 Rookie
    Silver Subscribed

    Nov 25, 2017
    4,338
    WI
    Full Name:
    Dustin
    To a degree, however the sticking point was doing things properly. You can duct tape 2 wires together to get current through. Or you can solder and heat shrink them. Both methods will get the current through although one method is much better than the other. If you're paying that much I wouldn't want any shortcuts taken.

    We are just beating a dead horse though. The people with mechanical, machining, and engineering backgrounds along with the people that work on these cars, some professionally have generally said that they believe the EAG tower is an inferior product. The other people that have EAG kits or a vested interest in the success of EAG say that is the better of the two because theirs hasn't broken.

    In the end, neither party will likely be swayed.

    Sent from my toilet using FerrariChat.com mobile app
     
    Marcoboxer likes this.
  23. ttforcefed

    ttforcefed F1 World Champ
    Rossa Subscribed

    Aug 22, 2002
    19,255
    yep - i had an oem actuator in my 430 conversion that went bad - was that Art's fault or ferrari's?

    Having spoken to both Art and John multiple times this week I'm confident both intend to provide support to customers going forward.
     
    bamaman, dhalperin13 and fossilfuel like this.
  24. imahorse

    imahorse F1 Rookie
    Silver Subscribed

    Nov 25, 2017
    4,338
    WI
    Full Name:
    Dustin
    Any part can fail. I saw an oem gear selector fail too however it was original to the car.

    Like I said in other posts on the topic. I'm not saying Eag parts are guaranteed to fail. A lot of them never will. I am saying that in my opinion they could have been done better and that shortcuts were involved in the manufacturing process based on my years involved in the machining and casting industry.

    Edit: I feel I should add that it is good news that both intend to support the current customers. It would be unfortunate to hear otherwise.

    Sent from my toilet using FerrariChat.com mobile app
     
  25. ttforcefed

    ttforcefed F1 World Champ
    Rossa Subscribed

    Aug 22, 2002
    19,255
    yep -if the majority of their conversions were bad imagine what it wld be like here.
     
    imahorse likes this.

Share This Page