FF Diamond cut wheel wieght

Anyone know how much the stock FF diamond cut front and rear wheels weigh?

After bending my stock diamond cut wheels on my FF I am rethinking if I want to keep running them. I hit a small pot hole not faster than 35mph and the rim completely bent. I did some research and saw that the wheels are actually cast. I was pretty surprised Ferrari pulled this on a 4k pound car that cost 400k brand new.

Any help appreciated.

 

no idea where you live, but I live in the northeast and those wheels are garbage… I went through four sets of them between summer and winter driving and will never use them again… I’ve been using bigger tires on Lusso wheels and that has helped a bunch

Image Unavailable, Please Login

 

PS I have had my car since new in 2012 and I’ve been through more than 10 sets of rims

 

How many miles do you have on it? And do you have a good source of those Lusso wheels? They look good.

 

I have about 40,000 miles on my car now… I don’t know if those Lusso wheels are made any better but that’s what I’ve been using… The professor in lusso/FF wheels is a guy on this board who I’m very close friends with, but I cannot spell his Fchat name… I will post it for you in a second… I think he will advise you find a set of forged wheels

 

@Caeruleus11

 

I am in San Francisco, aka Gotham. Roads are not great thanks for the tip.

 

That’s absurd, I hope warranty covered most

 

Zero

 

Read this

https://www.ferrarichat.com/forum/threads/ferrari-wheels-made-of-butter.637708/page-3

 

I just read the entire thing. I am left thinking the 812 wheels are the way to go.

 

Not sure i cant remember if i ever tried 812 wheels

 

Maybe even aftermarket in this case. Sounds like the Ferrari wheels are garbage.

 

Does any know what the stock FF wheels weigh cast or forged options? I can not find any info anywhere.

 

looks like i did

Image Unavailable, Please Login

 

Sorry i meant f12 not 812. I stopped paying attention to new Ferrari models after the ff and 458

 

At that point might as well start making your own wheels, thats what I did, I have them computer-simulation tested to 1000kg rather than 750kg per wheel

250$/wheel!

 

Not a fan!
Image Unavailable, Please Login

 

I went through 2 sets of these

 

only one for me, and that was enough

 

I have never been a fan of these. I feel like they look like BMW wheels. We pay 400k for a wagon you think Ferrari could at least give us some nice wheels. They Diamond cut look decent but seem to bend.

 

Or a ptu that doesn’t go bad

 

Yeah many live their life in fear of the PTU and don't even purchase the cars out of fear. Ferrari really should have stepped up.