Rear Hub/Knuckle Bearing Replacement Procedure | FerrariChat
Buy

Rear Hub/Knuckle Bearing Replacement Procedure

Discussion in '308/328' started by Imatk, Mar 26, 2024.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Imatk

    Imatk Formula Junior

    May 6, 2007
    774
    #1 Imatk, Mar 26, 2024
    Anyone replace their rear hub bearings? I think mine probably need it, and I'm not 100 percent on how to go about removal/installation... or part numbers.

    I've looked on this site and other places and haven't found any information other than part numbers for bearings... but I don't know if I need more than just the inner/outer bearing.

    Thanks
     
  2. absostone

    absostone F1 World Champ
    Silver Subscribed

    Jul 28, 2008
    10,064
    #2 absostone, Mar 26, 2024
    just two bearings, also a seal or a flat washer type seal depending on model year. a huge spacer and a huge C clip.
     
    waymar likes this.
  3. Imatk

    Imatk Formula Junior

    May 6, 2007
    774
    #3 Imatk, Mar 26, 2024
    Ok any special tools needed for this ? I have an '82
     
  4. absostone

    absostone F1 World Champ
    Silver Subscribed

    Jul 28, 2008
    10,064
    #4 absostone, Mar 26, 2024
    A big ring nut, I dont know the size. Dont you have a spare parts catalogue?
     
    waymar likes this.
  5. absostone

    absostone F1 World Champ
    Silver Subscribed

    Jul 28, 2008
    10,064
    #5 absostone, Mar 26, 2024
  6. Imatk

    Imatk Formula Junior

    May 6, 2007
    774
    #6 Imatk, Mar 26, 2024
    I do, I just don't know the procedure... haven't taken it apart to see what I need to replace.
     
  7. waymar

    waymar Formula 3

    Sep 2, 2008
    1,354
    Northeast, PA - USA
    Full Name:
    Wayne Martin
    #7 waymar, Mar 26, 2024
    Last edited: Mar 26, 2024
    I have an ‘82 and replaced the hub bearings with absolutely no problems. As ABSOSTONE stated you need the proper ring nut socket. The rest is basic mechanics…..
     
    Imatk likes this.
  8. Imatk

    Imatk Formula Junior

    May 6, 2007
    774
    #8 Imatk, Mar 26, 2024
    Thanks guys
     

Share This Page