Spark plug wire holders | FerrariChat

Spark plug wire holders

Discussion in '308/328' started by chasjen, Apr 12, 2024.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. chasjen

    chasjen Karting
    Silver Subscribed

    Oct 21, 2013
    81
    Dublin, Ohio
    Full Name:
    Charlie
    Need advice. Is there a trick or easy way to remove remnants of broke spark plug wire holder stud from the cam covers? Thanks. Charlie
     
  2. Rifledriver

    Rifledriver Three Time F1 World Champ

    Apr 29, 2004
    37,108
    Cowboy Capitol of the World
    Full Name:
    Brian Crall
    The hole in the valve cover is threaded. If any is sticking out grab it and spin it out.
    If not, drill a small hole in the center and stick a small sheet metal screw in there and pull out the center pin then use a small screw driver to grab the outer shell and spin it out.
     
    smg2 likes this.
  3. chasjen

    chasjen Karting
    Silver Subscribed

    Oct 21, 2013
    81
    Dublin, Ohio
    Full Name:
    Charlie
    Thank you.
     
  4. smg2

    smg2 F1 World Champ
    Sponsor

    Apr 1, 2004
    16,339
    Dumpster Fire #31
    Full Name:
    SMG
    For reference the thread pitch is m7x1. The plastic inserts use a center push in to expand the outer sleeve into the threads.
     
  5. chasjen

    chasjen Karting
    Silver Subscribed

    Oct 21, 2013
    81
    Dublin, Ohio
    Full Name:
    Charlie
    Perfect. Worked like a charm. Thanks again.
     

Share This Page