New owner with ventilation problem | Page 10 | FerrariChat

New owner with ventilation problem

Discussion in '348/355' started by Skiday, Feb 22, 2016.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

Page 10 of 14
  1. Qavion

    Qavion F1 World Champ Silver Subscribed

    Joined:
    Feb 20, 2015
    Messages:
    14,259
    Location:
    Sydney
    Full Name:
    Ian Riddell
    The air direction actuator has 5 wires and has a built-in potentiometer for position control. The recirc actuator has two wires and doesn't care where it is.
     
    Qavion, Jan 3, 2022
    #226
    MAD828 likes this.
  2. Ferrarium

    Ferrarium F1 Veteran Sponsor Rossa Subscribed

    Joined:
    Jul 28, 2018
    Messages:
    5,728
    Location:
    Central NJ
    Full Name:
    Eric
    Ok that makes sense.
     
    Ferrarium, Jan 3, 2022
    #227
  3. cooper1330

    cooper1330 Rookie

    Joined:
    Feb 21, 2007
    Messages:
    1
    So is anyone selling these gear sets yet ?
     
    cooper1330, May 30, 2022
    #228
  4. Ferrarium

    Ferrarium F1 Veteran Sponsor Rossa Subscribed

    Joined:
    Jul 28, 2018
    Messages:
    5,728
    Location:
    Central NJ
    Full Name:
    Eric
    Ferrarium, May 30, 2022
    #229
  5. Ferrarium

    Ferrarium F1 Veteran Sponsor Rossa Subscribed

    Joined:
    Jul 28, 2018
    Messages:
    5,728
    Location:
    Central NJ
    Full Name:
    Eric
    Ugh wrong thread response above thought it was another thread, sorry.

    A company does sell the gears with a repair however. It's called ECU doctors or something like that.

    Sent using FerrariChat.com mobile app
     
    Ferrarium, May 31, 2022
    #230
  6. Mike Morrissey

    Mike Morrissey Formula 3 Silver Subscribed

    Joined:
    Nov 2, 2018
    Messages:
    1,142
    Location:
    Denver, Colorado
    Full Name:
    Mike Morrissey
    Mike Morrissey, Jun 20, 2022
    #231
    Rf355AU, IvanRico and Qavion like this.
  7. Leclems

    Leclems Rookie

    Joined:
    May 12, 2023
    Messages:
    1
    Full Name:
    Clément bentejac
    Hello. I m very interested to by this. It is possible ? Thanks a lot
     
    Leclems, Jul 23, 2023
    #232
    Cole_ve and steved033 like this.
  8. Cole_ve

    Cole_ve Rookie

    Joined:
    May 29, 2018
    Messages:
    15
    Full Name:
    Cole B
    I’m also interested. ECU repair has no repair service anymore. At least not available as of today….
     
    Cole_ve, Oct 17, 2023
    #233
  9. Cole_ve

    Cole_ve Rookie

    Joined:
    May 29, 2018
    Messages:
    15
    Full Name:
    Cole B
    Hi. I’m wondering if you ever got these made?? I would love to buy one as there is NO availability of these units anywhere. Let me know…. Even a service like shapeways.com would be great…
     
    Cole_ve, Oct 17, 2023
    #234
    steved033 likes this.
  10. steved033

    steved033 F1 World Champ Owner Silver Subscribed

    Joined:
    Apr 12, 2017
    Messages:
    10,043
    Location:
    Atlanta, GA
    Full Name:
    Steve D.
    I did, PM me.

    sjd
     
    steved033, Oct 17, 2023
    #235
  11. TinkerF355

    TinkerF355 Rookie

    Joined:
    Jul 10, 2022
    Messages:
    10
    Location:
    France
    I'd also be interested
     
    TinkerF355, Oct 17, 2023
    #236
  12. steved033

    steved033 F1 World Champ Owner Silver Subscribed

    Joined:
    Apr 12, 2017
    Messages:
    10,043
    Location:
    Atlanta, GA
    Full Name:
    Steve D.
    PM me.
     
    steved033, Oct 17, 2023
    #237
  13. austincarnut

    austincarnut Rookie

    Joined:
    Nov 10, 2023
    Messages:
    1
    Location:
    AUSTIN
    Full Name:
    gerald mitchell
    Are you selling the timing actuator gear? i need one also.
     
    austincarnut, Nov 10, 2023
    #238
    steved033 likes this.
  14. steved033

    steved033 F1 World Champ Owner Silver Subscribed

    Joined:
    Apr 12, 2017
    Messages:
    10,043
    Location:
    Atlanta, GA
    Full Name:
    Steve D.
    shoot me a PM, I'll get to get another batch made.
     
    steved033, Nov 11, 2023
    #239
    308 GTB likes this.
  15. P-92

    P-92 Rookie

    Joined:
    Nov 24, 2023
    Messages:
    1
    Full Name:
    P-92
    Hi,

    Fantastic work on getting these gears created.

    I'm in a fortunate position where i have a 3D printer. would it be possible to get a copy of the CAD /(.stl) file so can can print a set for myself.

    I'd be very grateful.

    Kind Regards,

    Peter
     
    P-92, Nov 24, 2023
    #240
    IvanRico likes this.
  16. PBRacer

    PBRacer Karting

    Joined:
    Nov 3, 2003
    Messages:
    164
    Location:
    Virginia
    Full Name:
    Stan
    FYI
    Eurospares.com now has a ferrari replacement for the 7100 actuator. Not the original style but supposed to be a ferrari superseded part alternative. Mine came in a ferrari parts box, etc
    Unfortunately that isnt my problem but for those looking for a new actuator
     
    PBRacer, Apr 21, 2024
    #241
    Qavion and IvanRico like this.
  17. Philipnz

    Philipnz Karting

    Joined:
    Apr 12, 2015
    Messages:
    222
    Location:
    Whitianga New Zealand
    Full Name:
    Philip Hart
    I have just had this repaired on my car (i think the same thing) replacement actuator came from ferrari classique. Not the original part but one they have adapted. ECU turned out to be okay after a reset
     
    Philipnz, Apr 22, 2024
    #242
  18. johnk...

    johnk... F1 World Champ Owner

    Joined:
    Jun 11, 2004
    Messages:
    11,217
    Location:
    CT
    Full Name:
    John Kreskovsky
    Are there any identifying numbers and the name of the manufacture on the replacement part? It's likely an off the shelf item that can be purchased for much less else where.
     
    johnk..., Apr 22, 2024
    #243
  19. Qavion

    Qavion F1 World Champ Silver Subscribed

    Joined:
    Feb 20, 2015
    Messages:
    14,259
    Location:
    Sydney
    Full Name:
    Ian Riddell
    Here's a photo from Eurospares:

    Image Unavailable, Please Login
    Looks like some of the identifying marks have been melted away. The other numbers helped me find this:

    https://www.befr.ebay.be/itm/195186881585

    Looks like a wiring harness has been added. The internals may also have been changed. Poti 120° is printed on it. The Ferrari potentiometer moves through 180 degrees. The drive shaft also looks different.
     
    Qavion, Apr 22, 2024
    #244
  20. Philipnz

    Philipnz Karting

    Joined:
    Apr 12, 2015
    Messages:
    222
    Location:
    Whitianga New Zealand
    Full Name:
    Philip Hart
    That looks like it. The part my tech got was 869184 and price about what all the places are charging
     
    Philipnz, Apr 22, 2024
    #245
  21. johnk...

    johnk... F1 World Champ Owner

    Joined:
    Jun 11, 2004
    Messages:
    11,217
    Location:
    CT
    Full Name:
    John Kreskovsky
    Yes, melted part numbers. Real Ferrari stuff. LOL

    These actuators are a dime a dozen. A few years back I bought a couple to see if it they would work. The problem I had with the one that would have was that the shaft was too big and being hollow it could not be cut down to fit.
     
    johnk..., Apr 22, 2024
    #246
  22. Qavion

    Qavion F1 World Champ Silver Subscribed

    Joined:
    Feb 20, 2015
    Messages:
    14,259
    Location:
    Sydney
    Full Name:
    Ian Riddell
    Qavion, Apr 22, 2024
    #247
  23. vincentf355

    vincentf355 Karting

    Joined:
    Feb 24, 2010
    Messages:
    118
    Location:
    Taipei
    Full Name:
    vincent tseng
    For the broken gear of f355 timing actuator 63307100, after I bought one from Japan with crazy price, found a healthy genuine gear from same outlook actuator, molding and casting with improvements, I have precisely recovered and replicated genuine-like gears.
    The gear from Japan weights 3.4g runs ok but noisy due to off-centering or hard material I think, so I give up.
    The healthy genuine gear, which I have sourced some, weights 2.7g will eventually break due to life span, so I give up.
    Looking at genuine gear, the material of the broken part is different, so I recover my own which is genuine-like, 2.5g weight, similar material. solid, smooth and QUIET.
    Do not throw away your broken gear/faulty actuator, it can be recovered.
    Image Unavailable, Please Login
     
    vincentf355, Sep 13, 2024
    #248
    Buckets, IvanRico and Qavion like this.
  24. steved033

    steved033 F1 World Champ Owner Silver Subscribed

    Joined:
    Apr 12, 2017
    Messages:
    10,043
    Location:
    Atlanta, GA
    Full Name:
    Steve D.
    clever!

    What material did you use for the new overmolded area?

    sjd
     
    steved033, Sep 14, 2024
    #249
    vincentf355 likes this.
  25. vincentf355

    vincentf355 Karting

    Joined:
    Feb 24, 2010
    Messages:
    118
    Location:
    Taipei
    Full Name:
    vincent tseng
    vincentf355, Sep 14, 2024
    #250
    steved033 likes this.
Page 10 of 14

Share This Page