CS Mirrors

When I acquired my car it came with a set of what I assume are LHD CS mirrors plus a spare LHS mount and a slightly damaged RHS mirror . I thought only the mirror glass is different , not the complete mirror , but I may be wrong .
So I have a spare RHS mirror and LHS mount , not much use !! I have had them both 3D scanned and I inverted the LHS mount and printed it , here is the result.
I am at no stage planning on making these as fg360 is making great progress on his .

Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login

 

So I have decided I might give the RHS mount a go at manufacturing one . I split the 3D into two pieces in order to get the print layer lines in the correct orientation for a clean print and subsequently think two pieces may be an easier way to make the molds and parts . There is definitely a joint line on the horizontal mirror mount quite where the join lines are on the vertical is a bit difficult to work out

Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login

 

So the pivots are smaller than the ones in the Modena mirror !! Anyone found a source ? One of mine is broken and before I attempt a repair/remanufacture maybe someone has found what they came out of .

Image Unavailable, Please Login

 

Awesome , thank you