I have used Roadrunner and that guy is one of the best in the business. So meticulous. Charges by the hour, not the job, so you know it’s perfect. Highly recommend in the PNW.
I'll be having my car done (458) once I'm in miami for the winter starting November, if anyone could recommend a good installer that would be great.
I've had my F8 done twice and that's the way they had to do it also. I didn't notice it for a long time so it shouldn't be that noticeable.
Can you and perhaps everyone else who replied to this thread post a picture of the relief cut on the side of their S duct? It’ll be great to compare!
The section between the blue tape shows my relief cut. Image Unavailable, Please Login Sent from my iPhone using FerrariChat.com mobile app
Hi Mike, I am looking for an installer in the Bay and these guys have a great reputation but their pricing and 3-4 month wait for me unfortunately is too long. If you don't mind, can you DM me and let me know where you went and if you were happy with your results and would recommend. TY Sent from my iPhone using FerrariChat
Image Unavailable, Please Login Image Unavailable, Please Login Samsies Sent from my iPhone using FerrariChat
Most ALL of the F8's I have seen have the "precut" PPF ...especially the ones done at F Dealers ... Image Unavailable, Please Login Sent from my iPhone using FerrariChat
I ended up going with Greg Simms, he also has a great reputation here in the Bay Area. Only downside is he is also booked a few weeks 8+ out. Mine ended up about 95% satisfied, I have a few dust bubbles, he offered to take care of them, but I haven't had the chance to take it back, and get it fixed.
Mike, Thank you for the Recommendation ..what's the name of the shop? Did they end up having to make that relief cut on the side of the S duct or were they able to do it in one piece w/o the Relief cut? was
He runs his shop out of his personal garage. Feel free to dm me if you’d like his contact # There is a cut, definitely not as clean as custom fitting from a shop like Premier
