1994 Lambo VT wiring diagram

Hope all is well gentlemen. I hoping somebody may be able to help me out.

I'm in need of a wiring diagram for the lighting system, specifically the turn signal/hazard system.

I have a car here that was missing the signal flasher relay. Seems easy enough. But when I look at an OEM signal relay, it appears to have a 4 pin lay out, where as this car only has 3 terminals in the connector. I tried to wire in just a standard relay, but it doesn't work. I believe the relay in the lambo is a switched ground, not a switched positive like most.

I also need to see the wire colors to be sure they are laid out in the connector correctly. As I feel they have been tampered with. Any help is greatly appreciated

 

I have a copy of a copy which says 1993. Zero wiring diagram, however it does have the numbers to a wiring diagram, if you can find that. I spent fair amount of time on a Jalpa that had a turn signal problem. I replaced the relays, check the bulbs etc. What I found sounds crazy, however the problem was the fuse box allowed the wires to be pushed out of contact. I took the box off & pressed the wires back in place. It worked fine after that.

 

Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login

 

Thank you..yes I have the exact same..but zero actual schematics. I have ordered the correct relay, but do not want to install it until I know the wiring is correct.

 

Maybe this

https://www.lambostuff.com/xq/asp/prid.15153/action.1/qx/product.htm

https://www.scuderiacarparts.com/part-finder/lamborghini/diablo/oe/41/3318/59264?h=39070

or maybe

https://www.eurospares.co.uk/Lamborghini/Diablo/Diablo_(1991)/PartDiagrams/60_01_00/Dashboard_Instruments

https://www.scuderiacarparts.com/part-finder/lamborghini/diablo/oe/41/3318


let me know if any of that is relevant