Manual Conversion, Macchina Motorwerx? EAG?? | FerrariChat

Manual Conversion, Macchina Motorwerx? EAG??

Discussion in 'Ferrari Discussion (not model specific)' started by zhonghuihe, Aug 19, 2024.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. zhonghuihe

    zhonghuihe Rookie

    Aug 19, 2024
    7
    Full Name:
    Hugh
    Greetings,

    I am looking to get into my first ever Ferrari and have my mind set on a 599.. after chasing a manual converted 599 without coming to fruition, I am looking to just get an F1 car and have it converted.

    I know EAG was known for doing these conversion and after some search, looks like EAG is no more.. and the team that worked for EAG has since created Macchina Motorwerx and are doing conversions on Ferraris?

    TBH I am still confuse about the whole situation as I just learned this by reading the forums a couple mins ago.

    So! Here are my questions:
    1. Is EAG still in operation? If so, do they still do conversions?
    2. Does Macchina do conversions? If so, how much does it cost for a 599 manual conversion?
    3. Any other place in the US that offer these products/service?

    Many thanks.
     
  2. imahorse

    imahorse F1 Rookie
    Silver Subscribed

    Nov 25, 2017
    4,335
    WI
    Full Name:
    Dustin
    Eric C likes this.
  3. cfensty

    cfensty Formula 3
    Silver Subscribed

    Jan 1, 2008
    1,095
    South Carolina
    I believe GTE in NJ does them for about $35k including installation and reprogramming.


    Sent from my iPhone using FerrariChat
     
    zhonghuihe likes this.
  4. zhonghuihe

    zhonghuihe Rookie

    Aug 19, 2024
    7
    Full Name:
    Hugh
    Thank you, I will look into that. What are the differences between them and EAG, if you know.
     
  5. Eric C

    Eric C F1 World Champ
    Silver Subscribed

    Mar 20, 2009
    11,048
    St. Louis, MO
    Full Name:
    Eric
    Did you read the EAG thread?
     
  6. zhonghuihe

    zhonghuihe Rookie

    Aug 19, 2024
    7
    Full Name:
    Hugh
    Not all, but I did..
    Correct me if I am wrong, but I believe they are up and running again and doing the conversions. The team that worked for EAG has since created Macchina Motorwerx, which, apparently, also provide manual conversion services.
    Did I miss something?
     
  7. Eric C

    Eric C F1 World Champ
    Silver Subscribed

    Mar 20, 2009
    11,048
    St. Louis, MO
    Full Name:
    Eric
    yah, you kinda missed the most important part of the EAG story.
     
    imahorse likes this.
  8. Eric C

    Eric C F1 World Champ
    Silver Subscribed

    Mar 20, 2009
    11,048
    St. Louis, MO
    Full Name:
    Eric
    Watcha and also read the comments.

     
    imahorse likes this.

Share This Page