Not able to find BP6ES | FerrariChat
Buy

Not able to find BP6ES

Discussion in '308/328' started by absostone, Oct 2, 2024.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. absostone

    absostone F1 World Champ
    Silver Subscribed

    Jul 28, 2008
    10,029
    #1 absostone, Oct 2, 2024
    Last edited: Oct 2, 2024
    Went to two autopart stores and NAPA no luck. NGK site shows discontinued. Checked Rockauto and sparkplugs.com showing not available. Any Ideas ? I believe I have zero ohm extenders and tailor wires dont remember what type. TY
     
  2. Dave Bertrand

    Dave Bertrand Formula Junior
    Rossa Subscribed

    Dec 24, 2005
    824
    Castle Rock, CO
    #2 Dave Bertrand, Oct 2, 2024
    absostone likes this.
  3. absostone

    absostone F1 World Champ
    Silver Subscribed

    Jul 28, 2008
    10,029
    #3 absostone, Oct 2, 2024
    Last edited: Oct 2, 2024
  4. Rifledriver

    Rifledriver Three Time F1 World Champ

    Apr 29, 2004
    37,100
    Cowboy Capitol of the World
    Full Name:
    Brian Crall
    #4 Rifledriver, Oct 2, 2024
    Use the resistor version.
     
    Steve Magnusson and absostone like this.
  5. bjunc

    bjunc Formula Junior

    Jun 18, 2023
    453
    Miami, FL
    Full Name:
    Robert
    #5 bjunc, Oct 2, 2024
    I've purchased NGK plugs from Amazon, and never received fakes. Also, if you can't find non-resistor, you would be fine to run BPR6ES (5k resistor). In-fact, if you don't have resistors in the extenders, then you might even be better off with resistors in the plug (not that it would make a huge difference one way or the other).

    For what it's worth, I run the BP7ES.
     
  6. Rifledriver

    Rifledriver Three Time F1 World Champ

    Apr 29, 2004
    37,100
    Cowboy Capitol of the World
    Full Name:
    Brian Crall
    #6 Rifledriver, Oct 2, 2024
    I have.

    If its a carb car the 6 heat range has long been considered a better choice. 7's in the injected cars.
     
    ragtop1 and absostone like this.
  7. absostone

    absostone F1 World Champ
    Silver Subscribed

    Jul 28, 2008
    10,029
    #7 absostone, Oct 2, 2024
    Ok thanks I figured I’d end up with the R plugs. Ngk 7131 iirc
    Ty to all
     
  8. absostone

    absostone F1 World Champ
    Silver Subscribed

    Jul 28, 2008
    10,029
    #8 absostone, Oct 2, 2024
    One last thing, would going over .028 be good for fatter spark or no?
     
  9. Rifledriver

    Rifledriver Three Time F1 World Champ

    Apr 29, 2004
    37,100
    Cowboy Capitol of the World
    Full Name:
    Brian Crall
    #9 Rifledriver, Oct 2, 2024
    No. If it is a carb engine I have found they respond well to a smaller gap. I usually use .024 but have gone as small as .020.
     
    absostone likes this.
  10. Ferraripilot

    Ferraripilot F1 World Champ
    Owner Project Master

    May 10, 2006
    17,849
    Atlanta
    Full Name:
    John!
    #10 Ferraripilot, Oct 2, 2024
    They’re all over the place on eBay. NGK 7333
     
  11. Cameron Henlin

    Cameron Henlin Karting
    Silver Subscribed

    Jul 3, 2020
    151
    Roseburg OR
    Full Name:
    Cameron Henlin
    #11 Cameron Henlin, Oct 2, 2024
    Strongly recommend not buying plugs off amazon or ebay. We had another recent thread with several posts about this! It isn't worth it.
     
    Rifledriver, absostone and Dr Tommy Cosgrove like this.
  12. Tiltrider1

    Tiltrider1 Rookie

    Jul 26, 2022
    41
    Full Name:
    David Regula
    #12 Tiltrider1, Oct 3, 2024
    Try BPR6ESIX, they are Iridium plugs, work better than BPR6es.
     
    absostone likes this.
  13. absostone

    absostone F1 World Champ
    Silver Subscribed

    Jul 28, 2008
    10,029
    #13 absostone, Oct 3, 2024
    ive used them before but since im occasionally tweaking the mixture ill stay with the cheaper.
     
  14. Steve Magnusson

    Steve Magnusson Two Time F1 World Champ
    Lifetime Rossa

    Jan 11, 2001
    26,804
    30°30'40" N 97°35'41" W (Texas)
    Full Name:
    Steve Magnusson
    #14 Steve Magnusson, Oct 3, 2024
    Typo in that part number -- should be BPR6EIX.
     
    absostone likes this.
  15. Sergio Tavares

    Sergio Tavares Formula 3

    Nov 15, 2018
    1,308
    Full Name:
    Sergio Tavares
    #15 Sergio Tavares, Oct 5, 2024
    Please take care as there are Chinese copy NGK
     
    absostone likes this.
  16. absostone

    absostone F1 World Champ
    Silver Subscribed

    Jul 28, 2008
    10,029
    #16 absostone, Oct 5, 2024
    Yes Im aware as I stated earlier in the thread as a fuggazi. Lol
     
  17. 4redude

    4redude Formula Junior

    Jan 13, 2005
    732
    Fungus Corner
    Full Name:
    Brian Keegan
    #17 4redude, Oct 8, 2024
    Rutlands has them in stock.
     
    absostone likes this.
  18. absostone

    absostone F1 World Champ
    Silver Subscribed

    Jul 28, 2008
    10,029
    #18 absostone, Oct 8, 2024
    mpi told me there is a note to not sell the plugs as they for shop use only.
     

Share This Page