Late GTS wiper arm | FerrariChat
Buy

Late GTS wiper arm

Discussion in '206/246' started by racerboy9, Oct 10, 2024.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. racerboy9

    racerboy9 F1 Rookie
    Silver Subscribed

    Nov 3, 2003
    2,650
    #1 racerboy9, Oct 10, 2024
    This is the passenger side wiper arm on US spec 07924. Does this bend look correct? It sits nicely on the glass with almost no overhang on the 18" wiper blades. I've looked at a ton of pics online but a little hard to discern.
    Image Unavailable, Please Login
     
  2. Sergio Tavares

    Sergio Tavares Formula 3

    Nov 15, 2018
    1,308
    Full Name:
    Sergio Tavares
    #2 Sergio Tavares, Oct 11, 2024
    Almost.
    Where does the left side contact to high?
     
  3. Nuvolari

    Nuvolari F1 Veteran
    Owner Silver Subscribed

    Sep 3, 2002
    6,638
    Toronto / SoCal
    Full Name:
    Rob C.
    #3 Nuvolari, Oct 11, 2024
    Never say never but I do not think that is correct. To my eye that is a wiper arm from an early clapper system that is fitted upside down. My theory is that at some time in the life of the car it needed a new arm and this arm was the part the delivered. As it happens despite being the wrong part it would fit in this orientation and nobody thought anything of it until now. Again this is speculation on my part but I have never seen an arm like that on a Dino.
     
    Dino_Argento likes this.
  4. 2GT

    2GT Formula 3

    Aug 25, 2008
    1,842
    Western NY
    Full Name:
    Fred
    #4 2GT, Oct 11, 2024

    I looked at my right wiper arm, and it's perfectly straight. I think that Nuvolari's explanation is correct. Fred
     
  5. racerboy9

    racerboy9 F1 Rookie
    Silver Subscribed

    Nov 3, 2003
    2,650
    #5 racerboy9, Oct 11, 2024
    I have another straight arm for that side but this, even if not correct, sure seems a better fit with the 18" blades. It could be somebody bent it previously. It doesn't overhang the chrome trim.
     
  6. GermanDino

    GermanDino F1 Rookie

    Aug 14, 2007
    3,488
    Germany
    Full Name:
    Matthias
    #6 GermanDino, Oct 11, 2024
    0,8mm original wide....
    guess Rob is correct... in this case 0,7mm wide...
    looks like 0,7mm on the picture to me
     
  7. racerboy9

    racerboy9 F1 Rookie
    Silver Subscribed

    Nov 3, 2003
    2,650
    #7 racerboy9, Oct 11, 2024
    Last edited: Oct 11, 2024
    The service bulletin quotes 8.9mm blade. This blade is the correct width as the locking part of the blade is not squeezed down to 7mm. I am going to Auto e Moto d’Epoca and wiper blades and arms are about the only things on my hit list.
     
  8. Sergio Tavares

    Sergio Tavares Formula 3

    Nov 15, 2018
    1,308
    Full Name:
    Sergio Tavares
    #8 Sergio Tavares, Oct 11, 2024

    Attached Files:

  9. racerboy9

    racerboy9 F1 Rookie
    Silver Subscribed

    Nov 3, 2003
    2,650
    #9 racerboy9, Oct 11, 2024
    GermanDino likes this.
  10. npwmd2

    npwmd2 Formula Junior

    Mar 31, 2015
    254
    Hudson Valley
    Full Name:
    Neal
    #10 npwmd2, Oct 13, 2024
  11. GermanDino

    GermanDino F1 Rookie

    Aug 14, 2007
    3,488
    Germany
    Full Name:
    Matthias
    #11 GermanDino, Oct 13, 2024
    slight bend is correct....
    if 0.8mm wide (end of wiper arm) it`s the original one....
     

Share This Page