Wheel well material for 296 GTB | FerrariChat
Buy

Wheel well material for 296 GTB

Discussion in '296' started by chasbailey1, Oct 28, 2024.

Tags:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. chasbailey1

    chasbailey1 Rookie

    Aug 30, 2023
    23
    Full Name:
    CHARLES BAILEY
    #1 chasbailey1, Oct 28, 2024
    Hello, does anyone have an understanding if the wheel well liner material (felt) that is stock on a Ferrari 296 GTB can be replaced with a a hard plastic material or possibly be replaced with materials from a challenge car?

    The wheel well liners of all four of my wheels has been damaged due to track use, and I need to find a more sustainable replacement. Thanks !
     
  2. rxbg

    rxbg Formula Junior

    Apr 11, 2010
    406
    USA
    #2 rxbg, Oct 29, 2024
    wow. any pictures. which track and how much track time?
     
  3. chasbailey1

    chasbailey1 Rookie

    Aug 30, 2023
    23
    Full Name:
    CHARLES BAILEY
    #3 chasbailey1, Oct 29, 2024
    Thanks very much for asking. I only have one picture currently, but it shows the material over the vents on the rear side of the wheel well being damaged. But the top of it is damaged as well.
    Image Unavailable, Please Login

    The race track was COTA and it was 30 minute sessions broken up by two hours each for a total of 5 over a weekend.
     
  4. 488gtbmasergt

    488gtbmasergt Karting

    Oct 18, 2016
    169
    #4 488gtbmasergt, Oct 29, 2024
    I do not have good pix but I also had to replace both sides (rear) after one day at the track. I did probably 5 sessions. Probably a total of 100 minutes.
    Cost of replacement is not too expensive but I would also be interested if there is any chance to have a more durable solution.
     
  5. chasbailey1

    chasbailey1 Rookie

    Aug 30, 2023
    23
    Full Name:
    CHARLES BAILEY
    #5 chasbailey1, Oct 29, 2024
    Gotcha, I’ll be back in touch as I find out options.
     
  6. Excelsior

    Excelsior Karting

    Apr 29, 2022
    57
    Full Name:
    Excelsior
    #6 Excelsior, Oct 30, 2024
    See if warranty will cover it. This is not meant to be a consumable like brake pads or rotors. I've never had wheel well liners perforate like that during track days. It looks to be a sloppy cutout. After replacing them, maybe have someone 3D print a vent overlay and rivet it over the vent area. Another option would be to rivet or screw (with pronged tee nut backers) on a stainless wire mesh over the vents to stop the rocks from blasting it.

    https://www.lowes.com/pd/Hillman-1-4-in-Stainless-Steel-Standard-SAE-3-Prong-Tee-Nut/3025385
     
    bamaman likes this.
  7. chasbailey1

    chasbailey1 Rookie

    Aug 30, 2023
    23
    Full Name:
    CHARLES BAILEY
    #7 chasbailey1, Oct 30, 2024
    Thanks, terrific ideas!. I’ll have the Ferrari folks inquire about them possibly being covered by warranty, I haven’t asked them to look into that of yet. But I know the damage has been caused just from marbles from the track days.
     
  8. rxbg

    rxbg Formula Junior

    Apr 11, 2010
    406
    USA
    #8 rxbg, Oct 30, 2024
    doubt ferrari will cover them. poor design. should be more stout. never had an issue with my R8s. disappointing for a sportscar of this caliber. i'll update this thread with my experiences. how much did they cost installed?
     
  9. chasbailey1

    chasbailey1 Rookie

    Aug 30, 2023
    23
    Full Name:
    CHARLES BAILEY
    #9 chasbailey1, Oct 30, 2024
    Yes, I totally agree, poor design. Of all the other Ferrari’s I have recently inspected at the dealership, this appears to be the only one with the felt material.
    I haven’t had to pay for the replacement yet because I’m looking for alternative options since I’ll continue to do track days with the 296 I expect.
     

Share This Page