360 - Wet PS line coupling | FerrariChat
Buy

360 Wet PS line coupling

Discussion in '360/430' started by kaj750, Jan 31, 2025.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. kaj750

    kaj750 Formula Junior

    May 9, 2022
    278
    Fresno, CA
    #1 kaj750, Jan 31, 2025
    Just before finishing for the day I discovered this. I haven't touched it yet as I'm out of time for the day. Wanted to do my due diligence and check with you guys to see if anybody has found something similar on their car and, if so, how did you fix it?
    I'm hoping it's just a loose fitting but wanted to ask around in case it could be something I may need to order parts for.

    To anyone with experience, I welcome any and all and put an advice. Thank you in advance!


    Image Unavailable, Please Login
     

    Attached Files:

  2. GogglesPisano

    GogglesPisano F1 Rookie
    Silver Subscribed

    Sep 13, 2022
    3,212
    East Bay, California
    Full Name:
    Joe
    #2 GogglesPisano, Jan 31, 2025
    Any o-rings in that connection? If so, maybe due a swap?

    Shooting from the hip, I'd say clean the connection, put a few wrenches on it and see if it tightens any more. Then just wait and see.
     
    kaj750 likes this.
  3. yelcab

    yelcab F1 World Champ
    Consultant

    Nov 29, 2001
    13,573
    San Carlos, CA
    Full Name:
    Mitchell Le
    #3 yelcab, Jan 31, 2025
    There is no o-ring there. Clean it, tighten it, and watch it for the next 1,000 miles.
     
    kaj750 likes this.
  4. kaj750

    kaj750 Formula Junior

    May 9, 2022
    278
    Fresno, CA
    #4 kaj750, Feb 1, 2025
    Yesssss. That's what I was hoping to read. I didn't want to think about a 25yo o-ring that needed replacing (and I'd probably never find).

    Thanks, guys. I'll do so then report back. It may be a while. Currently R&Ring exhaust manifolds and possibly doing the timing belt.
     

Share This Page