Removing aftermarket shields | FerrariChat

Removing aftermarket shields

Discussion in '456/550/575' started by Doug R, Feb 26, 2025.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Doug R

    Doug R Karting

    Joined:
    Oct 11, 2005
    Messages:
    208
    Location:
    Yellow Springs Ohio
    I’m curious if anyone has experience removing aftermarket shields. My 456 has a set on it that while they are nice quality I’d like to get them off. I have a few ideas, but would love to hear of anyone else’s experience. Thanks, Doug R
     
  2. tazandjan

    tazandjan Three Time F1 World Champ Lifetime Rossa Owner

    Joined:
    Jul 19, 2008
    Messages:
    39,175
    Location:
    Clarksville, Tennessee
    Full Name:
    Terry H Phillips
    No real experience, but the consensus has been to use dental floss and heat.
     
    pchop and Auraraptor like this.
  3. wbklink

    wbklink F1 Rookie

    Joined:
    Sep 2, 2009
    Messages:
    3,420
    Location:
    Los Angeles
    Full Name:
    Bill Karp
    Once again, Terry is right what a surprise....:)
     
  4. pchop

    pchop F1 Rookie Rossa Subscribed

    Joined:
    Jun 12, 2002
    Messages:
    2,667
    Location:
    Usually NY often elsewhere.
    Full Name:
    John
    + add a little patience and a set of gloves...speaking from personal experience.
     
  5. centerfireman

    centerfireman Formula Junior Silver Subscribed

    Joined:
    Feb 23, 2015
    Messages:
    486
    Location:
    Roseville, CA
    Some types of dental floss break too easily. I have found that braided fishing line works best (along with gentle heat).
     
    pchop and Ferrari55whoa like this.

Share This Page