Side grill

Damaged side grill pn: Ferrari Mondial T - RH Side Wing Grille - P/N 62529610. Does anyone know or know who might have this part?

 

You are looking for a damaged one or a good one ?
You can ask if they have a damaged one =

https://redbaycars.com/webshop#!/ferrari-mondial-34-t/products/air-inlet-grill-lh-m-part-nr-62529710

 

Thank you for your reply. I erred when I stated I had a 1986 Mondial. Senior moment. It’s a 1984 Mondial. I found a replacement grille at Ferrari Parts Exchange - $375. Lucky as this grille is available they are all damaged with the mounting “pins” broken. There’s no way to fix that. Believe me I tried. They also have the grille for the 86 Mondial brand new but it’s a little bit different size. That one was $1,325. If anyone needs one for a 3.2 Mondial I would suggest getting this one since it seems all of them are no longer available.

 

The pins can be repaired or replaced, I replaced a few of mine with some small plastic pieces that I fabricated and fitted and glued in place on a couple of them. Not hopeless, you just have to be creative!
It's not pretty but it works!
Alden

 

I tried to glue the tabs on but they kept breaking off so I just gave up. For $325 for a new one seemed a small price to pay for my own stupidity during removal. LOL

 

What did you use for glue? I tried to re-glue one of these tabs once, but nothing I tried worked....

 

Two part epoxy.
Alden

 

Two part epoxy! I never thought of that. However I did find a new one for $325 which I bought. However I think I’ll try to repair the old one. Great advice.

 

Epoxy does not stick to all kind of plastics (abs is troublesome). I'd rather use Stabilit Express. Thats's what I've used on the 400 front valence.

Also some chineese meetoo epoxy, that is actually some kind of two parts acrylic, works well on plastics, but the fumes are obnoxious.

 

Crude drawing of what I fabricated, JB Weld worked great. I used a plastic putty knife for material, it was the correct thickness. Cut a groove in the strake to receive the new part and secured it with the JB Weld. Holding great for 8 years so far.
Alden
Image Unavailable, Please Login Image Unavailable, Please Login

 

Thanks to all who responded. I did find a new one that was on sale for $325. The company is Ferrari Parts Exchange. Phone number is: 916-974-1939. Delivery takes some time but they have a lot of spare parts.

 

Some members recent experience with Ferrari parts exchange has not been good, use the Ferrari chat search function and read the posts, as recently as January 2025.
Alden

 

You are correct that they are low on the customer service side. I may regret that I purchased from them. Time will tell. Thanks for the other suppliers.

 

It's a good idea to search for information about suppliers here before you make a purchase.
Alden