308 GTS QV Front Badge A Little Crooked... | FerrariChat

308 GTS QV Front Badge A Little Crooked...

Discussion in '308/328' started by 3omar, Jul 13, 2025.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. 3omar

    3omar Formula Junior
    Silver Subscribed

    Dec 16, 2003
    328
    United States
    Full Name:
    Omar
    I noticed something on my car today for the first time. The front badge is slightly crooked. The picture below is taken at an angle, but you can definitely see that it's a bit slanted. That slant is also present if you look at the badge straight on.

    It's not noticeable unless you know what you're looking for, but I am wondering if anyone has seen this before on other 308s. It would be funny if some cars came like that from the factory. I kind of doubt that, but you never know!


    Image Unavailable, Please Login
     
  2. ragtop1

    ragtop1 F1 Veteran
    Silver Subscribed

    Nov 11, 2006
    5,240
    Ontario
    Full Name:
    Larry Warren
    It should be an easy fix. Two nuts hold the badge in place under the nose. Hopefully, there is some play in the alignment holes. If not, you may have to drill one of the holes a size larger for adjustment.
    It does seem odd. I've owned 5 vintage Ferraris and haven't seen one misaligned like yours.
     
  3. 4rePhill

    4rePhill F1 Veteran

    Oct 18, 2009
    8,254
    Worcester, England
    Full Name:
    Phill J
    The badge looks immaculate - My monies on it's been replaced at some time, and either the new badge wasn't fitted centrally, or the retaining nuts weren't fully tightened and the badge has slowly shifted position until it became wedged on the edge of the recess
     
  4. 3omar

    3omar Formula Junior
    Silver Subscribed

    Dec 16, 2003
    328
    United States
    Full Name:
    Omar
    Thank you, guys. It does seem like an easy fix!
     
    ragtop1 likes this.
  5. TheMayor

    TheMayor Ten Time F1 World Champ
    Rossa Subscribed

    Feb 11, 2008
    106,085
    Vegas baby
    The good news is the inset in the bodywork is straight. The badge needs to be adjusted.
     
  6. miketuason

    miketuason F1 World Champ
    Owner Silver Subscribed

    Feb 24, 2006
    15,808
    Cerritos, CA.
    Full Name:
    Mike
    Actually, the badge is straight, It’s the body that’s crooked :)
     
    eurocarguy101 and bitsobrits like this.

Share This Page