Wind Deflector 360 Spider

Mja · Aug 24, 2025 at 7:23 PM

Here is my attempt to replace the fabric and gasket on my spider- I wanted something close to OEM look- I could not find the right material but I still think it turned out OK Image Unavailable, Please Login Image Unavailable, Please Login

robertjskelton · Aug 25, 2025 at 2:48 PM

Looks good. I used some pool screen and twine that I had around, it looks pretty good too.

Mja · Aug 25, 2025 at 7:12 PM

Its a lot more see thru than the original, and using a gasket instead of the caulking looks a lot better

gvanrenterghem · Aug 26, 2025 at 4:08 AM

If that helps, flagging this discussion on the same topic: https://www.ferrarichat.com/forum/threads/360-windstop-gaskets.671962/page-2

I think I found not only the rubber part but also the mesh fabric that is extremely close to the OEM fabric.

Must admit @Mja did a much better job than me at cutting the rubber neatly... impressed.

Need12Cilindri · Aug 26, 2025 at 12:21 PM

gvanrenterghem said: ↑

If that helps, flagging this discussion on the same topic: https://www.ferrarichat.com/forum/threads/360-windstop-gaskets.671962/page-2

I think I found not only the rubber part but also the mesh fabric that is extremely close to the OEM fabric.

Must admit @Mja did a much better job than me at cutting the rubber neatly... impressed.
Click to expand...

Great job on the roll hoop mesh. I think I will do the same. I long ago replaced the center wind stop with a 430 clear one. Although sometimes I get reflections, mostly it provides better visibility. Direct replacement for the mesh one.

Image Unavailable, Please Login

Mja · Aug 26, 2025 at 7:11 PM

I used screen door spline 5mm to hold in the mesh and used the rubber as a capping only- held down with glue

Conversations

Alerts

Wind Deflector 360 Spider

Mja Rookie

robertjskelton Rookie

Mja Rookie

gvanrenterghem Karting

Need12Cilindri Rookie

Mja Rookie

Share This Page