360 Project

Hi everyone I'm new to this community but not as lucky to own one of the greatest cars. The reason for this post is that I'm doing my final project at NJIT and its on intake for a Ferrari 360 Modena. I need help getting dimensions of the rear hatch and the dimensions and the location with respect of the hatch of the air boxes.
Please Help me
Thanks Tom

 

stop by and see us at the time square shoot and americana show...
all the 360s in the ec crew have air intake mods.

 

werd zen

 

....360 intakes cast a lot to modify....

 

go to classic coach in elizabeth, maybe you can help design something for their racing team

 

Maybe this guy could design something for Rene's car so the intakes remain attached to the manifolds!

 

Double werd, zen...

 

Yes everything will be mounted on the Hatch and the intakes are going to stay in place. The top draft intakes are going to be mounted of each sides of Hatch. The side vents will be taken out and My design intakes will be mounted in the factory mounts. The final product will be made out of carbonfiber. There is much more im have problems uploading the pictures.
Please help me upload pics !!!

 

u have to be 'silver subscribed' or 'rossa subscribed' in order to upload pictures, meaning that u have to pay for a membership on fchat.

go to pay to play plaYa.
otherwise u can email the pics to anyone of us and we will gladly post them up for you. (asp924 at yahoo dot com, if u want to send them to me)

 

Pics sent to Hubert888
thank you

 

can anyone else host the pics for me
please

 

email me chrlsstyles at aol.com

 

OK already, where are the pics? I'm getting impatient...

 

Here are your pics:

.

 

thanks hubert
these are just drawn ones i have ones made on AutoCAD
I know all of the dimensions are wrong but if one of u could help me out and give me exact measurements
Thanks tom

 

interesting, how does this intake take into account of rain? or that doesn't really matter right now

 

wow ur up at 2am.

 

The vents around the rear window are not the intakes for the engine.

 

I think that's what his project is about, using those vents as a direct source for air.

 

OK the rain is not an issue as of right now, I'm going to use the stock drains on the sides of the engine.
The side vents which are used right now to relase the heats that the engine produces underneath the glass are the ones im going to use.
The design is going to be ram air and the vents are going to be taken out and im going to install my newly design intakes using the factory mounting points.
The intakes will go up as the hatch goes up its going to be as one. Once u close the hatch the intakes will directly go on top of the airboxes. This will create ram air intake.
Now could someone please help me and give me exact dimensions of the hatch, vents, air intake location with respect to the airboxes, and mounting points.
I would really apreciate all of the help guys.
Another thing if anyone would let me know where can i go and measure everything myself please let me know.
Thank you for ur interests

 

Hey man, not trying to knock your project, just want to make sure you don't get a "F".......how are those vents going to produce a "ram air intake" as air is not forced into it

I am sure you already know that when i was asking about rain, i was thinking water in the intake....

 

werd zen.

no F's here

 

The vents are above and side of the roof and quater pannel.
Still deciding on the design but thats how the air will be drawn look t the first pic.
Please help me with dimensions

 

So will anyone plese help me out with this ???
I mean i know u are all busy but at least can some one point me in the right direction.

 

Can some one please help me ??????
Im willing to pay whatever for help !!!
At least please point me in the right direction !!!
Thanks