Badge Help | FerrariChat

Badge Help

Discussion in '308/328' started by Loudoun_Prime, Sep 2, 2024.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Loudoun_Prime

    Loudoun_Prime Rookie Silver Subscribed

    Joined:
    Jul 10, 2020
    Messages:
    47
    Location:
    Aldie, VA
    Full Name:
    Doug Magee
  2. bitsobrits

    bitsobrits Formula Junior Rossa Subscribed Silver Subscribed

    Joined:
    Nov 12, 2011
    Messages:
    747
    Location:
    Omaha, NE area, US
    Full Name:
    Steve
    Paint pens are your friend. Clean, paint. If you mess up, wipe off and start over. Might want to practice a bit if you've not used them before, but not really that that hard. I would add it's much easier if the emblem is horizontal, so best to remove it first.
     
    Loudoun_Prime likes this.
  3. miketuason

    miketuason F1 World Champ Owner Silver Subscribed

    Joined:
    Feb 24, 2006
    Messages:
    15,812
    Location:
    Cerritos, CA.
    Full Name:
    Mike
    Airbrush works well too.
     
  4. F1blood

    F1blood Rookie

    Joined:
    Jul 17, 2024
    Messages:
    44
    Full Name:
    Brad Dinardo
    I think those badges are available new on Ebay .
     
  5. Loudoun_Prime

    Loudoun_Prime Rookie Silver Subscribed

    Joined:
    Jul 10, 2020
    Messages:
    47
    Location:
    Aldie, VA
    Full Name:
    Doug Magee
  6. F1blood

    F1blood Rookie

    Joined:
    Jul 17, 2024
    Messages:
    44
    Full Name:
    Brad Dinardo
    You cant beat that, looks really nice.
     
    tomberlin likes this.
  7. bitsobrits

    bitsobrits Formula Junior Rossa Subscribed Silver Subscribed

    Joined:
    Nov 12, 2011
    Messages:
    747
    Location:
    Omaha, NE area, US
    Full Name:
    Steve
  8. Anthony Rapuano

    Anthony Rapuano Karting

    Joined:
    Aug 16, 2022
    Messages:
    211
    Location:
    CT
    Full Name:
    Anthony V Rapuano, Jr.
    Might I recommend removing the badges once you have finished the infill painting and give them a couple coats of automotive clear topcoat. It will make cleaning the badges easier in the future and keep the white infill protected from dirt/discoloration.
     
    bitsobrits, F1blood and miketuason like this.

Share This Page