choke parts

I'm in the middle of a side project to add various missing choke parts onto my carbs. Yes, I know the cold start mechanism is a poor design and should never actually be used, but I want to have it set up and working. I've got most of the parts I need, but I'm still missing the following and haven't been able to find any of them from the usual suspects. Part numbers from the DCNF exploded view:

one #4 (61280.056) choke control rod (connects the choke lever to the pivot that in turn connects with the other carbs) - I can try get one fabricated, but it's got an odd key on one end that makes it harder than just putting two bends in a piece of steel rod.

one #54 (47610.043) choke lever return spring - Superformance claims to have this, but all they provide is the throttle return spring which, while close, isn't quite the same size - bigger diameter and more windings.

If any of you have these parts laying around and are willing to part with them, please let me know.

Many thanks...

 

Hello Mark,

Could you scan the page, and post? I can check in my collection of Weber doo-dads to see what I got...

Paul

 

I've attached a photo of the carb with the parts highlighted. Thanks!
Image Unavailable, Please Login

 

Have you tried Pierce Manifolds in Gilroy, California?

 

Yes, no luck.

 

Hello Mark,

I believe these are the parts you need.... These were in my misc. Weber doo-dad collection...

Have surface corrosion...but usable.

Send me a private email with an address...

Best Regards

Paul
Image Unavailable, Please Login
Image Unavailable, Please Login

 

Done!