diagnostic port | FerrariChat

diagnostic port

Discussion in '348/355' started by dwwis, May 5, 2016.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. dwwis

    dwwis Karting

    Joined:
    Oct 19, 2015
    Messages:
    68
    Location:
    South Milwaukee Wi.
    Full Name:
    Dennis Wesley
    ok guys
    where the heck did they put the diagnostic port
    on my 95 f355 spider built in july
     
  2. Dave rocks

    Dave rocks F1 World Champ BANNED

    Joined:
    Nov 23, 2012
    Messages:
    16,047
    Location:
    Orchard Park, NY
    Full Name:
    Dave Lelonek
    Are you asking about OBD?

    If so, a 95 is OBDI and you need to pull codes from each ECU by holding a button on the ECU and counting MIL flashes from the dash.

    96 and up MY are OBDII and the port is under the dash (steering wheel)
     
  3. dwwis

    dwwis Karting

    Joined:
    Oct 19, 2015
    Messages:
    68
    Location:
    South Milwaukee Wi.
    Full Name:
    Dennis Wesley
    so what your saying is that I have to take the car to the dealerships tech to get the suspension malfunction light cleared
     
  4. taz355

    taz355 F1 Veteran Owner Silver Subscribed

    Joined:
    Feb 18, 2008
    Messages:
    6,016
    Location:
    Indio Ca/ Alberta
    Full Name:
    Grant
    If its the suspention light yes take to dealer with their ferrari tester.

    If you started the car a few times without moving it you will also get the light.

    You can also take the caps off and look to see if the gear is broke, usually obviouse.
     
  5. phrogs

    phrogs F1 Veteran Silver Subscribed

    Joined:
    Apr 13, 2004
    Messages:
    7,346
    Location:
    Kzoo Michigan
    The suspension light also comes on after multiple restarts and shut downs without driving the car.
     
  6. fastradio

    fastradio F1 Rookie BANNED Professional Ferrari Technician

    Joined:
    Apr 26, 2006
    Messages:
    3,664
    Location:
    New England
    Full Name:
    David Feinberg
    The suspension ECU and diagnostic dongle (ALDL connector) are to be found in the passenger foot-well. If diagnostics are required, a shop with the factory SD-1 or SD-2 tool will be needed. There are no communications on a 355, regardless of year, with the OBD port for this particular system.
     

Share This Page