360 - F360 firmware | FerrariChat

360 F360 firmware

Discussion in '360/430' started by 3s-ge, Apr 14, 2021.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. 3s-ge

    3s-ge Karting

    Joined:
    Jun 23, 2012
    Messages:
    222
    Full Name:
    Alex
    3s-ge, Apr 14, 2021
    #1
  2. 3s-ge

    3s-ge Karting

    Joined:
    Jun 23, 2012
    Messages:
    222
    Full Name:
    Alex
    3s-ge, Apr 14, 2021
    #2
  3. lkstaack

    lkstaack Formula Junior

    Joined:
    Dec 9, 2020
    Messages:
    252
    Location:
    San Diego
    Full Name:
    Lars
    I know nothing about software, but it seems that your engine's left and right banks must be reacting differently to sensor information. If you can't sense a rough running motor, the differences must be small.
     
    lkstaack, Apr 16, 2021
    #3
  4. brogenville

    brogenville Formula 3 Rossa Subscribed

    Joined:
    Apr 24, 2012
    Messages:
    2,268
    Location:
    UK
    Full Name:
    Robin
    Yeah, that’s not going to help your engine run well. It’s actually surprising how often I’ve heard about these issues. One of the original ecu’s probably failed years ago, and the owner would have thrown in whatever virgin ecu they could get their hands on. There’s dozens of different firmware versions, including loads of changes to p codes, calibration tables and of course F1/gated setup.


    Sent from my iPhone using FerrariChat
     
    brogenville, Apr 16, 2021
    #4

Share This Page