Sold F430 Silencer

Hi everyone,

I've got a used full muffler/silencer setup from an F430. Was planning on doing the conversion for my 360 while I was awaiting my Kline to arrive.

I bought new hardware for the main heat areas as what I got was rusty, plus a set of brand new gaskets.

The passenger side tips had broken studs, so I grinded them off, and bought new bolts of similar size, PN: 16044024, that is used on the exhaust systems of many Ferraris.

My total parts are:

(1) 214176 Silencer
(1) 216040 RH Tail Pipe
(1) 216041 LH Tail Pipe
(2) 177612 Gaskets (new)
(1) 181383 or 212691 Main Exhaust Bracket (not sure, it's not marked)
(1) 221909 Exhaust Bracket Reinforcement
(1) 195803 Support
(1) 210892 RH Exhaust Bracket
(1) 210893 LH Exhaust Bracket

Attachment from Reinforcement to Main Bracket:
(4) 16043324 Screws
(4) 12646724 Washers
(4) 12601379 Washers
(4) 16100824 Nuts

Attachment from Main Bracket to Support:
(4) 16043324 Screws
(4) 127496 Washers
(4) 16100824 Nuts

Attachment from Support to LH/RH Exhaust Bracket:
(4) 16043434 Screws (new)
(8) 12646778 Washers (new)
(8) 127496 Washers (new)
(4) 16100824 Nuts (new)

Attachment from Tail Pipes to Silencer:
(2) 16044024 Bolts (new, replacements for damaged bolts)
(8) 179808 Nuts (new)

If you are wanting this for a 360, two of the brackets in the picture won't be needed. These are 223143 and 223144. I didn't mess with the related hardware as I didn't need it.

Looking for $1000 + Shipping for everything.

Thanks!
Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login

 

Would you ship to Australia?

 

Sent you a message

 

Sold thank you!