fender shields? | FerrariChat

fender shields?

Discussion in 'Ferrari Discussion (not model specific)' started by NYJETSFAN, Dec 29, 2003.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. NYJETSFAN

    NYJETSFAN Formula 3

    Joined:
    May 11, 2001
    Messages:
    1,096
    Location:
    Kalifornia
    Full Name:
    Jr
    Has anyone used JeanBaracat.com for fender shields?
    are they any good?
     
    NYJETSFAN, Dec 29, 2003
    #1
  2. darth550

    darth550 Six Time F1 World Champ Lifetime Rossa

    Joined:
    Jul 14, 2003
    Messages:
    61,115
    Location:
    In front of you
    Full Name:
    BCHC
    darth550, Dec 29, 2003
    #2
  3. bert308

    bert308 Formula 3

    Joined:
    Nov 30, 2002
    Messages:
    1,776
    Location:
    Roermond Netherlands
    Full Name:
    Bert Kanters
    I have them, they are good. But the yellow is too bright, the lines in the horse are not correct and I think the "S F" is a bit to thick, you only see that if you can compare or know.
    So I guess they are perfect for the older cars, certainly for the $80 I paid, but I wouldn't think of putting them on a 360, then get originals or the ones Nickm from this site has.
     
    bert308, Dec 30, 2003
    #3
  4. branko

    branko F1 Rookie Owner

    Joined:
    Mar 17, 2003
    Messages:
    3,710
    Location:
    Birmingham, Alabama
    Full Name:
    Branko Medenica
    Bert308 is correct. I ordered a pair and tried to mount them on my 308 fender, only the curve on the shield did not match the curve of the car. Also the overall width of the shield was wider than the resin ones I already have. I sent them back.
     
    branko, Dec 30, 2003
    #4
  5. Mitch Alsup

    Mitch Alsup F1 Veteran

    Joined:
    Nov 4, 2003
    Messages:
    9,724
    <Warning humor content enclosed>

    I can assure you that if you get in a fender bender, the shields will not protect the fender in the least. So, why call them a shield?

    </warning>
     
    Mitch Alsup, Dec 30, 2003
    #5

Share This Page