ISUK Question

Hi Iain,

Can you tell me where you sourced the rubber seal around the Blower trunking on the photo below please.

Many Thanks

Image Unavailable, Please Login

 

Hello Charles. We used some left over pieces of the rubber seal that fits along the bottom of the front bulkhead brake servo cover to create that donut shaped seal for the blower trunking. The join is hidden out of sight in that photo on the far side of the hose.

 

Hi Iain,
a Really neat solution. Thank you.

 

Isn't that SP1 from Cicognani, same as the inner splash panel edging?

 

Yes I believe it is.

 

Correct Scott. The same seal was used on both sections and we found it installed on my unrestored Rosso Dino car around the blower trunking hose like this when the car was disassembled.

Image Unavailable, Please Login

 

Image Unavailable, Please Login

This is the seal I believe:

http://www.cicognaniguarnizioni.it/guarnizione-paratie-sottoparafanghi-16325300_7256?search=16325300

I also found this seal used for the same purpose in my L-series and copied the style when I restored the car. As mentioned the seal is used on several other places in our cars including the fender inner panels, air intake panels, firewall between engine and trunk etc:

Image Unavailable, Please Login