Missing cavalino

Hi,

Anyone know where I can source the missing cavalino in the 308 center console?
Image Unavailable, Please Login

 

Ricambi America or Black Bart's Emporium should help you out. I can measure mine and investigate mounting if you need help.

 

I see those on eBay all the time. Depending upon the exact size you may find one easily there, like this one:

http://cgi.ebay.com/ebaymotors/Ferrari-1-5-Ashtray-Horse-Emblem-308-328-348-Mondial_W0QQcmdZViewItemQQcategoryZ6755QQihZ019QQitemZ290205744252QQrdZ1QQsspagenameZWDVW

 

Try "Scaledetails" (Stephine) on this site, but I have not seen her around in this area of F-Chat for some time. Bought mine from her.

 

the ebay ones are scaledetails. I just bought a 1.5" for $10. If you're patient I can compare it the original and give you feedback. PM me if you want, I can supply digital pic's if needed.

 

Thanks buys, much appreciated.

 

I bet you will find the original just slightly larger that the one you bought from scaledetails. Yes please supply a digital pic of the two side-by-side.

 

I think the 1.5" (40mm) is too big for that location. I can't measure my car as it is not here. Below is a link for some parts.

http://www.superformance.co.uk/a-308/badges.htm

 

b27,

OOOOOPS! You may be right, I don't know.

On my 81 GTSi the horse is on the ashtray cover lid not the center tunnel itself. Sorry, my bad.

My horse was "liberated" while the car was in transit from the US to me in Europe. I ordered the 1.5" horse and put it on the ash tray lid. And low-and-behold, the horse was just a tad small as evidenced by the remaining glue residue from the original horse.

I'll bet the original was about 1.6" in height. Someone here measured theirs for me awhile back and it came to the height of 1.59" or there abouts.

Mark