430 OBD Pinout

Does anyone have the pinout for the OBD port on the 430? I could have sworn I had found this at some point, but haven't been able to track it down. Specifically this is a 2009 430 Scuderia.

 

OBD is a standard so they are all the same.
https://pinoutguide.com/CarElectronics/car_obd2_pinout.shtml

 

Yes but the manufacturer specific and undefined pins are what I’m after. From memory the b-can and c-can bus are routed to the OBD connector on these cars.


Sent from my iPhone using FerrariChat.com mobile app

 

Both CAN pins are listed at that link.

 

Sure, but most manufacturers have additional CAN/Serial buses going to their OBD connector. See the Fiat diagram at that same site:

https://pinoutguide.com/CarElectronics/fiat_car_obd_ii_pinout.shtml

Worst case I'll try to reverse engineer what pins are there and what they do.

 

Ok it took me a bit to understand the way Ferrari lays out their wiring diagram, but from going through that this is what I believe. Note this is specifically for a Scuderia, but probably applies to any 08-09 430.

Pin 1: B-Can B (Likely High, but need confirmation)
Pin 2: J 1850 Bus +
Pin 3: Immobilizer (Couldn't find what the pin on the immobilizer is from my diagram)
Pin 4: Gnd
Pin 5: Gnd
Pin 6: C-Can High (Note there are actually multiple C-CAN buses, mostly between the two engine ECU's, but those don't get to the OBD plug)
Pin 7: ISO 9141-2 K Line
Pin 8: HVAC K-Line (Note the diagram lists two connections on the HVAC node as K-Line, but one is likely L-Line?)
Pin 9: B-Can A (Likely Low, but needs confirmation)
Pin 10: J1850 Bus -
Pin 11: HVAC K-Line (See note above)
Pin 12: Dashboard K-Line
Pin 13: Suspension Module K-Line
Pin 14: C-Can Low
Pin 15: ISO 9141-2 L-Line
Pin 16: +12V Un-switched

If anyone has any corrections to what I've mapped out let me know, and I will update this for reference if I find any new information.

 

I can confirm the CAN-B bus.
I do have a Maserati pinout somewhere I can dig up if its helpful. A lot of the systems are identical between the cars and hence the mappings of which ECU's/to which pins&bus should be similar.